ICOM IC-F8101

F8101 dirancang khusus untuk komunikasi radio jarak jauh. Ini beroperasi pada frekuensi HF dari 500kHz hingga 29,9999MHz dan mentransmisikan dengan hingga 125W PEP (Peak envelope Power). F8101 mendukung mode operasi SSB, AM, CW dan Data dan termasuk teknologi Digital Signal Processor (DSP) terbaru untuk peningkatan kinerja pengirim dan penerima. Fungsi Clear Talk menggunakan DSP untuk memisahkan noise dari sinyal untuk audio yang lebih jernih. Ketika infrastruktur terbatas atau tidak ada, F8101 Icom yang ringkas, kokoh, dibangun untuk MIL-STD-810-G dan radio tahan air (IP54), adalah solusi sempurna. Sistem ALE bawaan secara otomatis memilih saluran terbaik dan membuat tautan komunikasi. ALE menyediakan interoperabilitas dengan radio 2G ALE lainnya menggunakan standar MIL-STD-188-141B dan FED-STD-1045A ALE.

Description

Description

General
IC-F8101
Frequency coverage
Receive
0.5–29.9999MHz
Transmit
1.6–29.9999MHz
Number of channels
500 channels
Type of emissions
Australia version
J3E, A3E (RX only)
Export/USA versions
J3E, A3E, A1A, F1B, J2B
Power supply requirements
13.8V DC Negative ground
10.8–15.6V (Australia versions)
11.73–15.87V (Export/USA versions)
Current drain
Receive
Less than 3A (Max. audio), 1.0A (Stand-by)
Transmit
Less than 28A (Maximum output)
Dimensions (W×H×D)
(Projections not included)
174×62×259 mm;
6.85×2.44×10.2 in
(Controller attached type)
Weight (approx.)
3.9kg; 8.6lb (Controller attached type)
Transmitter
IC-F8101
Output power
Australia version
J3E: 100, 50, 10W PEP (typical)
Export/USA versions
J3E/A1A: 125, 50, 10W PEP (typical)
A3E: 30, 12.5, 3W (typical)
F1B/J2B: 75, 50, 10W PEP (typical)
Spurious emissions
64dB below PEP typical (EXP/Australia versions)
64dB below PEP (USA versions)
Receiver
IC-F8101
Sensitivity
(at 10dB S/N)
J3E
(Pre-amp. ON)
0.5–1.5999MHz: 14dBμV
1.6–29.9999MHz: -14dBμV
A3E
0.5–1.5999MHz: 22dBμV
1.6–29.9999MHz: 6dBμV
Squelch sensitivity
J3E
(at 13.5MHz)
Threshold: Less than +20dBμV
Tight: Less than +90dBμV
A3E
(at 1.000MHz)
Threshold: Less than +30dBμV
Tight: Less than +110dBμV
Spurious responses
More than 70dB
Audio output power
4.0W at 10% distortion with a 4Ω load
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.
Tested to IC-F8101, AD-119, CFU-F8100 and MB-126.
Standard
MIL-810 G
Method, Proc.
Low Pressure Storage
500.5 I
Low Pressure Operation
500.5 II
High Temperature Storage
501.5 I
High Temperature Operation
501.5 II
Low Temperature Storage
502.5 I
Low Temperature Operation
502.5 II
Temperature Shock
503.5 I-C
Solar Radiation
505.5 I
Rain Blowing
506.5 I
Rain Drip
506.5 III
Humidity
507.5 II
Salt fog
509.5
Dust Blowing
510.5 I
Vibration
514.6 I
Shock Functional
516.6 I
Shock Transit Drop
516.6 IV
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Tested to IC-F8101, AD-119 and CFU-F8100.
Ingress Protection Standards
Dust & Water
IP54 (Dust-protection and water resistant)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ICOM IC-F8101”

Your email address will not be published. Required fields are marked *