Description
GENERAL
| Audio output power | Internal SP | 1300 mW typ. (5% distortion, 8 Ω load) |
|---|---|---|
| External SP | 650 mW typ. (5% distortion, 8 Ω load) | |
| HM-222H/HM-245T | 1300 mW typ. (5% distortion, 8 Ω load) | |
| Operating temperature range | –30 °C to +60 °C | |
| Power supply voltage | 7.5 V DC nominal | |
| Current drain (approximate) |
Receive | Max. audio (INT SP) 520 mA, Stand-by 300 mA |
| Transmit | Hi (5 W) 1.8 A | |
| Dimensions (H × W × D; Projections not included) |
140.5 × 61.7 × 42.8 mm (with BP-303) | |
| Weight (approximate) | 320 g (with BP-303) | |
| Bluetooth® technology | Version: 5.3, Output: Class 1, Profile: HFP, HSP | |
LTE (4G)/W-CDMA (3G)
| Network | EUR | LTE (4G): B1, B3, B7, B8, B20 W-CDMA (3G): B1, B8 |
|---|---|---|
| Rated output power | 0.25 W | |
| Receiver sensitivity (QPSK) | –95 dBm max. | |
| Compatibility | IP503H Lite | |
IDAS™ digital/Analogue
| IP730D Lite | IP740D Lite | ||
| GENERAL | |||
| Frequency range* (* Depending on the version) |
136 – 174 MHz | 350 – 470 MHz | |
| Number of conventional channels | 128 channels /8 zone | ||
| Type of emission* | |||
| EUR | 16K0F3E, 8K50F3E, 4K00F1E/F1D | ||
| TRANSMITTER | |||
| Output power (Hi, L2, L1) | 5 W, 2 W, 1 W | ||
| Frequency stability | ±1.0 ppm | ||
| Spurious emissions | |||
| 0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) | |||
| FM hum and noise (Without CCITT filter) | 70/60 dB typ. (W/N) | ||
| FSK error | 5% max. 1% typ. (Digital) | ||
| RECEIVER | |||
| Sensitivity | Digital (1% BER) |
–6.5 dBμV emf typ. | –7 dBμV emf typ. |
| Analogue (20 dB SINAD) |
–2 dBμV emf typ. (N) | –2 dBμV emf typ. (N) | |
| Adjacent channel selectivity |
Digital | 62 dB typ. | 63 dB typ. |
| Analogue | 72/67 dB typ. (W/N) | 72/67 dB typ. (W/N) | |
| Intermodulation rejection |
Digital | 76.5 dBμV emf typ. | 73 dBμV emf typ. |
| Analogue | 67 dB typ. | 66 dB typ. | |
| Hum and noise (Without CCITT filter) |
60 dB typ. (W/N) | ||
Measurements made in accordance with 3GPP TS-36, TIA-603, EN300 086 and EN301 166.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
IP Rating
| Ingress Protection Standard | |
|---|---|
| Dust & Water | IP67 (Dust-tight and waterproof) |
Battery Life
| Battery Pack | Type | Capacity | Operating time* | ||
|---|---|---|---|---|---|
| LTE | VHF | UHF | |||
| BP-303 | Li-ion, 7.2V | 3350 mAh (typ.) 3200 mAh (min.) |
Up to 24 hours | Up to 13 hours (at 5 W) Up to 15 hours (at 1 W) |
|
* Calculated under the following conditions:
– Bluetooth and Backlight are OFF
– TX : RX : standby = 5 : 5 : 90
The operating time may be shorter, depending on:
– The operating conditions, such as Bluetooth, GPS, Dual mode, and so on.
– The distance with the cellular station or the signal strength.
Supplied Accessories
- Battery pack, BP-303
- Belt clip, MB-133
Reviews
There are no reviews yet.