IC-V86 /IC-U86

The Next Generation of the IC-V80, with 7 W Output Power and 1500 mW Audio

Categories , Brand:

payment method :

Description

General

IC-V86 IC-U86
Frequency range
(TX/RX guaranteed range)
136–174 MHz
(EX Hi power TX : 144–160 MHz)
EXP1 : 400–472 MHz
(EX Hi power TX : 430–450 MHz)
EXP2 : 330–400 MHz
(EX Hi power TX : 335.4–380 MHz)
Type of emissions F2D, F3E (FM, FM-N)
Number of channels 207 channels (200 memory channels, 1 call channel and 6 scan edges)
Antenna impedance 50Ω
Power supply requirement 7.5V DC
Operating temperature range –20 ˚C to +60 ˚C, –4 °F to +140 °F
Frequency stability ±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F)
Current drain
(For the transceiver  with a “U” mark on the serial number label)
TX
(EX Hi/Hi/Mid/Low)
1.6/1.4/1.0/0.5 A typical EXP1: 1.6/1.5/1.0/0.5 A typ.
EXP2: 1.6/1.4/0.9/0.5 A typ.
RX
(Max. audio)
450 mA typ. (INT SP),
190 mA typ. (EXT SP, Single end)
450 mA typ. (EXT SP, BTL)
450 mA typ. (INT SP),
190 mA typ. (EXT SP, Single end)
450 mA typ. (EXT SP, BTL)
Dimensions (W×H×D)
(Projections not included)
58.6 × 112 × 30.5 mm, 2.3 × 4.4 × 1.2 in
(with BP-298)
Weight (Approximate) 300 g, 10.6 oz
(with BP-298, FA-B57V)
290 g, 10.2 oz
(with BP-298, FA-B57U)

Transmitter

IC-V86 IC-U86
Output power
(EX Hi/Hi/Mid/Low)
7.0/5.5/2.5/0.5 W 5.5/4/2/0.5 W
Maximum frequency deviation ±5.0 kHz/±2.5 kHz (Wide/Narrow)
Spurious emissions Less than –60 dB
External microphone connector 3-conductor 2.5 (d) mm (1/10″)/2.2 kΩ

Receiver

IC-V86 IC-U86
Sensitivity –124 dBm typical EXP1: –121 dBm typical
EXP2: –123 dBm typical
Squelch sensitivity –126 dBm typical EXP1: –123 dBm typical
EXP2: –125 dBm typical
Selectivity (Wide/Narrow) 75 dB typical/ 70 dB typical 70 dB typical/ 68 dB typical
Intermodulation 65 dB typical
Audio output power
(5% distortion with 8 Ω load)
(For the transceiver  with a “U” mark on the serial number label)
Internal SP 1500 mW typical
External SP 450 mW typical (single end)
1500 mW typical (BTL, HM-222HLWP connected)
External speaker connector 3-conductor 3.5(d)mm (1/8″)/8Ω

Applicable U.S. Military Specifications

Standard MIL-810 G
Method
Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Vibration 514.6 I
Shock 516.6 I, IV

 

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Applicable IP Rating

Ingress Protection Standard
Dust and Water IP54 (Dust-protection, water resistance)

 

All stated specifications are subject to change without notice or obligation

Supplied Accessories

  • BP-298/BP-264, battery pack*
  • BC-240, Desktop charger
  • BC-242, AC adapter
  • MB-124, belt clip
  • Antenna*

* May differ, depending on transceiver version

Reviews

There are no reviews yet.

Be the first to review “IC-V86 /IC-U86”

Your email address will not be published. Required fields are marked *