Description
General
| IC-F9511HT | |||
|---|---|---|---|
| Frequency coverage | 136–174MHz | ||
| Number of channels | Max. 512 channels / 128 zones | ||
| Channel spacing | 15/30kHz (analog) 12.5kHz (digital) |
||
| Type of emission | 16K0F3E, 11K0F3E, 8K10F1E, 8K10F1D | ||
| Current drain (approx) |
Tx High (110W) | 22.0A | |
| Rx | Stand-by | 400mA | |
| Max. audio | 3.0A | ||
| Dimensions (projections not included; W×H×D) |
175×60×279 mm 6.89×2.36×10.98 in |
||
| Weight (approx.) | 4.1kg; 9.0lb | ||
Transmitter
| IC-F9511HT | |
|---|---|
| RF output power (High) | 110W |
| Spurious emissions | 70dB min. |
| Frequency stability | ±1.0ppm |
| Audio harmonic distortion | 3% typical 40% deviation |
| FM Hum and Noise | 48dB typ. (W) 45dB typ. (N) |
Receiver
| IC-F9511HT | ||
|---|---|---|
| Sensitivity (at 12dB SINAD) | 0.25μV (typ.) (at threshold) | |
| Adjacent channel selectivity | Analog (W/N) | (TIA/EIA603B)81/53dB (typ.) (TIA/EIA603) 85/77dB (typ.) |
| Digital | 63dB (typ.) | |
| Spurious response rejection | 85dB min. | |
| Intermodulation rejection | 78dB typ. | |
| AF output power (at 3% distortion with a 4Ω load) |
15W (typ.) | |
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog* | 509.5 | – |
| Blowing Dust* | 510.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F
| Ingress Protection Standard | |
|---|---|
| Dust & Water | IP54* (Dust-protection and water resistant) |
* Salt fog, Blowing dust and IP54 tests were performed on the controller and RMK-2 only.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Hand microphone, HM-138G
- Control unit
- Separation cable, 5m (16.4 ft)
- DC power cable
- Micropphone hanger
- Key assign stickers
- Mounting bracket kit for main unit
- Mounting bracket kit for controller
Note that an External Speaker must be purchased separatelly.
Reviews
There are no reviews yet.