IC-F9511/IC-F9521

Ready for: P25 Conventional, P25 Trunking and Analog Conventional. ALL in One Radio!

Categories , Brand:

payment method :

Description

General

IC-F9511T/S IC-F9521T/S
Frequency coverage
(Varies according to version)
136–174MHz 400–470MHz
450–512MHz
Number of channels Max. 512 channels / 128 zones
Channel spacing
(Varies according to version)
15/30kHz (analog)
12.5kHz (digital)
12.5/25kHz (analog)
12.5kHz (digital)
Type of emission 16K0F3E, 11K0F3E
8K10F1E, 8K10F1D
Current drain Tx High 11.0A 14.0A
Rx Stand-by 350mA
Max. audio 1000mA
Dimensions
(projections not included; W×H×D)
175×45×170 mm
6.89 ×1.77 ×6.69 in
Weight (approx.) 1.5kg; 3.3lb

Transmitter

IC-F9511T/S IC-F9521T/S
RF output power 50W, 25W, 5.0W
Spurious emissions 70dB min.
Frequency stability ±1.0ppm
Audio harmonic distortion 1% typ.
40% deviation
FM Hum and Noise 48dB typ. (W)
45dB typ. (N)
48dB typ. (W)
43dB typ. (N)

Receiver

IC-F9511T/S IC-F9521T/S
Sensitivity Analog 0.25μV (typ.) (at 12dB SINAD)
Digital 0.25μV (typ.) (at 5% BER)
Adjacent channel selectivity Analog (W/N) 81/53dB (typ.)
(TIA/EIA603B)
79*1/53dB (typ.)
(TIA/EIA603)
Digital 63dB (typ.)
Spurious response rejection 85dB min. 70dB*2 min.
Intermodulation rejection 78dB typ.
AF output power
(at 10% distortion with a 4Ω load)
4W (typ.)
22W (typ.)(External audio)

*1 81dB typ. (406.1-420MHz)
*2 85dB min. (406.1-420MHz)
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Ask your dealer if you need 25kHz bandwidth.

Applicable U.S. Military Specifications & IP Rating

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.

Standard MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Humidity 507.5 II
Salt Fog* 509.5
Blowing Dust* 510.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F

Ingress Protection Standard
Dust & Water IP54* (Dust-protection and water resistant)

* Salt fog, Blowing dust and IP54 tests were performed on the controller and RMK-2 only.
All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Microphone, HM-148G
  • DC power cable
  • Microphone hanger
  • External Speaker, SP-35 (for IC-F9511T/IC-F9521T only)

Reviews

There are no reviews yet.

Be the first to review “IC-F9511/IC-F9521”

Your email address will not be published. Required fields are marked *