Description
General
| Frequency coverage | Receive | 0.5–29.9999 MHz |
|---|---|---|
| Transmit | 1.6–29.9999 MHz | |
| Number of channels | 500 channels | |
| Type of emissions | Australia version | J3E, A3E (RX only) |
| Export/USA versions | J3E, A3E, A1A, F1B, J2B | |
| Power supply requirements | 13.8 V DC Negative ground 10.8–15.6 V (Australia versions) 11.73–15.87 V (Export/USA versions) |
|
| Current drain | Receive | Less than 3 A (Max. audio), 1.0 A (Stand-by) |
| Transmit | Less than 28 A (Maximum output) | |
| Dimensions (W×H×D) (Projections not included) |
174×62×259 mm; 6.85×2.44×10.2 in (Controller attached type) |
|
| Weight (approx.) | 3.9 kg; 8.6 lb (Controller attached type) | |
Transmitter
| Output power | Australia version | J3E: 100, 50, 10 W PEP (typical) |
|---|---|---|
| Export/USA versions | J3E/A1A: 125, 50, 10 W PEP (typical) A3E: 30, 12.5, 3 W (typical) F1B/J2B: 75, 50, 10 W PEP (typical) |
|
| Spurious emissions | 64 dB below PEP typical (EXP/Australia versions) 64 dB below PEP (USA versions) |
|
Receiver
| Sensitivity (at 10dB S/N) |
J3E (Pre-amp. ON) |
0.5–1.5999 MHz: 14 dBμV 1.6–29.9999 MHz: -14 dBμV |
|---|---|---|
| A3E | 0.5–1.5999 MHz: 22 dBμV 1.6–29.9999 MHz: 6 dBμV |
|
| Squelch sensitivity | J3E (at 13.5 MHz) |
Threshold: Less than +20 dBμV Tight: Less than +90 dBμV |
| A3E (at 1.000 MHz) |
Threshold: Less than +30 dBμV Tight: Less than +110 dBμV |
|
| Spurious responses | More than 70 dB | |
| Audio output power | 4.0 W at 10% distortion with a 4 Ω load | |
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.
Tested to IC-F8101, AD-119, CFU-F8100 and MB-126.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure Storage | 500.5 | I |
| Low Pressure Operation | 500.5 | II |
| High Temperature Storage | 501.5 | I |
| High Temperature Operation | 501.5 | II |
| Low Temperature Storage | 502.5 | I |
| Low Temperature Operation | 502.5 | II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing | 506.5 | I |
| Rain Drip | 506.5 | III |
| Humidity | 507.5 | II |
| Salt fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Vibration | 514.6 | I |
| Shock Functional | 516.6 | I |
| Shock Transit Drop | 516.6 | IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Tested to IC-F8101, AD-119 and CFU-F8100.
| Ingress Protection Standards | |
|---|---|
| Dust & Water | IP54 (Dust-protection and water resistant) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
Controller attached type:
- RF unit with controller head
- Microphone, HM-193
- Microphone hanger kit
- External speaker, SP-35L
- DC power cable
- Spare fuses
Detached controller type:
- RF unit
- Remote controller head
- Seaparation kit, RMK-6
- Microphone, HM-193
- Microphone hanger kit
- External speaker, SP-35L
- DC power cable
- Spare fuses
Command microphone type:
- RF unit
- Command Microphone, HM-192
- Microphone hanger kit for HM-192
- Extension microphone connector
- External speaker, SP-35L
- DC power cable
- Spare fuses
Reviews
There are no reviews yet.