Description
General
| IC-F7510 | IC-F7520 | IC-F7540 | ||
|---|---|---|---|---|
| Frequency coverage* (* Depending on version) |
136 ~ 174 MHz | 380 ~ 470, 450 ~ 512 MHz | USA 769 ~ 775 MHz (RX/TX), 799 ~ 805 MHz (TX), 806 ~ 824 MHz (TX), 851 ~ 869 MHz (RX/TX) EXP |
|
| Number of channels | 1024 channels /128 zones
2000 channels (with ISL-P25CHEX) |
|||
| Type of emission* (* Depending on version) |
16K0F3E*, 11K0F3E, 8K50F3E, 8K10F1E/F1D, 8K10F1W * 25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. |
16K0F3E, 14K0F3E, 11K0F3E, 8K50F3E, 8K10F1E/F1D, 8K10F1W | ||
| Power supply requirement | 13.6 V DC nominal | |||
| Current drain (approx.) | Tx | 14.0 A (at 50 W) | 14.0 A (at 45 W) | 14.0 A (at 35 W) |
| Rx | 1.2 A /400 mA (Max. audio (external SP)/Standby) | |||
| Antenna impedance | 50 Ω | |||
| Operating temperature range | −30 °C to +60 °C, −22 °F to +140 °F | |||
| Dimensions (W × H × D; Projections not included) |
174 × 55 × 150 mm, 6.9 × 2.2 × 5.9 in | |||
| Weight (approx.) | 1500 g, 3.3 lb | |||
Transmitter
| IC-F7510 | IC-F7520 | IC-F7540 | |
|---|---|---|---|
| Output power (Hi, L2, L1) | 50 W, 25 W, 5 W | 45 W, 25 W, 5 W | USA 30 W, 15 W, 2 W (769 ~ 775, 799 ~ 805 MHz), 35 W, 15 W, 2 W (806 ~ 824, 851 ~ 869 MHz) EXP |
| Frequency stability | ±1.0 ppm | ||
| Spurious emissions | 80 dB typ. | ||
| FSK error | 1% typ. (C4FM), 3% typ. (H-CPM) | ||
| Maximum frequency deviation | ±5.0 kHz (@25 kHz), ±2.5 kHz (@12.5 kHz) | ±5.0 kHz (@25 kHz), ±4.0 kHz (@20 kHz), ±2.5 kHz (@12.5 kHz) |
|
| FM Hum and noise | 55 dB typ. | ||
| Audio harmonic distortion | 0.5% typ. (AF 1 kHz, 40% deviation) | ||
Receiver
| IC-F7510 | IC-F7520 | IC-F7540 | ||
|---|---|---|---|---|
| Sensitivity | Digital (5% BER) |
0.22 μV typ. (@C4FM, H-DQPSK) |
0.22 μV typ. (@C4FM, H-DQPSK) |
0.22 μV typ. (@C4FM, H-DQPSK) |
| Analog (12 dB SINAD) |
0.22 μV typ. (@25/12.5 kHz) |
0.22 μV typ. (@25/12.5 kHz) |
0.22 μV typ. (@25/20/12.5 kHz) |
|
| Adjacent channel selectivity | Digital | 63 dB typ. (@C4FM, TIA-102) 63 dB typ. (@H-DQPSK, TIA-102) |
63 dB typ. (@C4FM, TIA-102) 60 dB typ. (@H-DQPSK, TIA-102) |
65 dB typ. (@C4FM, TIA-102) 63 dB typ. (@H-DQPSK, TIA-102) |
| Analog | 80/57 dB typ. (@25/12.5 kHz, TIA-603B), 80/76 dB typ. (@25/12.5 kHz, TIA-603) |
75/57 dB typ. (@25/12.5 kHz, TIA-603B), 75/75 dB typ. (@25/12.5 kHz, TIA-603) |
75/70/57 dB typ. (@25/20/12.5 kHz, TIA-603B), 75/70/68 dB typ. (@25/20/12.5 kHz, TIA-603) |
|
| Spurious response rejection | 80 dB typ. | 80 dB typ. | 80 dB typ. | |
| Intermodulation rejection | Digital | 77 dB typ. | 75 dB typ. | 75 dB typ. |
| Analog | 77 dB typ. | 75 dB typ. | 75 dB typ. | |
| Audio output power | Internal SP | 4.0 W typ. (at 5% distortion with 4 Ω load) | ||
| External SP | 4.0 W typ. (at 5% distortion with 4 Ω load) | |||
Measurements made in accordance with TIA-102 (P25), TIA-603 (FM Wide/narrow).
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
| Ingress Protection Standard | |
|---|---|
| Dust & Water | IP55 (Dust-protection and water jet resistance) |
Some functions and options will be available in the future.
Supplied Accessories
- Hand microphone, HM-220
- DC power cable, OPC-1132A
- Mounting bracket kit
- Microphone hanger
Reviews
There are no reviews yet.