Icom Marine IC-M400BB
- Description
Icom Marine IC-M400BB
Space-Saving, Two-Piece Configuration
The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.
New Intuitive User Interface
The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.
Active Noise Cancelling
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.
10 W Loud Audio, Public Address and Foghorn
The IC-M400BB has a built-in 10 W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.
Built-in Class D DSC
The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Common NMEA Interface
When connected to an external GPS receiver, current position and time are shown on the COMMANDMIC display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.
AIS Target Call with MA-510TR/MA-500TR
When connected to the optional MA-510TR/MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR.
Other Features
- MarineCommander™ compatible
- AquaQuake™ water draining function (HM-195B/SW)
- IPX7 submersible protection both for IC-M400BB and HM-195B/SW (1 m depth for 30 minutes)
- Dual/tri-watch function for monitoring Ch.16 and/or call channel
- Priority and normal scan
- Supports 4-digit channels
General
| Frequency range TX | 156.025–157.425 MHz |
| Frequency range RX | 156.050–163.275 MHz |
| Frequency range Ch. 70 | 156.525 MHz |
| Power supply requirement | 13.8 V DC nominal (11.7–15.9 V DC) |
| Dimensions (W×H×D) (Projections not included) IC-M400BB | 216×79×125 mm; 8.5×3.11×4.92 in |
| Dimensions (W×H×D) (Projections not included) HM-195B/SW | 67.5×144.5×37 mm; 2.66×5.69×1.46 in |
| Weight IC-M400BB | 830 g; 1.83 lb |
| Weight HM-195B/SW | 400 g; 14.1 oz |
| Current drain TX 25W output | 5.5 A Max. |
| Current drain RX Max. audio | 3.5 A Max. |
| Sensitivity Main | 0.22 μV typical (at 12 dB SINAD) |
| Sensitivity Ch. 70 | −5 dBμ emf typ. (1% BER) |
| Intermodulation Main | More than 70 dB |
| Intermodulation Ch. 70 | More than 68 dBμ emf (1% BER) |
| Audio output power (at 10% distortion, 4 Ω load) | More than 2 W (HM-195B/SW) More than 10 W (RX speaker) |
| RF output power | 25 W, 1 W (High, low) |
