Description
General
IC-F7010T/S |
IC-F7020T/S |
||
|---|---|---|---|
Frequency coverage*(* Depending on version) |
136–174 MHz |
350–400, 450–512,450–520 MHz |
|
Number of channels |
1024 channels /128 zones |
||
Type of emission*(* Depending on version) |
16K0F3E*, 11K0F3E, 8K50F3E,8K10F1E/F1D, 8K10F1W |
||
Power supply requirement |
7.5 V DC nominal |
||
Current drain (approx.) |
Tx |
1.5 A |
1.8 A |
Rx |
560 mA /150 mA(Max. audio (internal SP)/Standby) |
||
Antenna impedance |
50 Ω |
||
Operating temperature range |
−30 °C to +60 °C;−22 °F to +140 °F(Radio specifications) |
||
Dimensions(W × H × D;Projections not included) |
53.6 × 123.5 × 38.2 mm; 2.1 × 4.9 × 1.5 in(With BP-284) |
||
Weight (approx.) |
180 g; 6.4 oz (main unit) |
||
355 g; 12.5 oz(BP-284, MB-133,FA-S81VS) |
355 g; 12.5 oz(BP-284, MB-133,FA-S81US) |
||
* ISL-P25W required for 25 kHz bandwidth operation for USA versions.
Transmitter
IC-F7010T/S |
IC-F7020T/S |
|
|---|---|---|
Output power (Hi, L2, L1) |
5 W, 2 W, 1 W |
|
Maximum frequency deviation |
±5.0 kHz (@25 kHz), ±2.5 kHz (@12.5 kHz) |
|
Frequency stability |
±1.0 ppm |
|
Spurious emissions |
80 dB typ. |
|
FM Hum and noise |
55 dB typ. (@25 kHz), 55 dB typ. (@12.5 kHz) |
|
Audio harmonic distortion |
0.5% typ. (AF 1 kHz 40% deviation) |
|
FSK error |
1% typ. (C4FM), 3% typ. (H-CPM) |
|
Receiver
IC-F7010T/S |
IC-F7020T/S |
||
|---|---|---|---|
Sensitivity |
Analog(12 dB SINAD) |
0.22 μV typ.(@25/12.5 kHz) |
0.23 μV typ.(@25/12.5 kHz) |
Digital(5% BER) |
0.22 μV typ.(@C4FM, H-DQPSK) |
0.23 μV typ.(@C4FM, H-DQPSK) |
|
Adjacent channel selectivity |
Analog |
80/57 dB typ.(@25/12.5 kHz, TIA-603B),80/76 dB typ.(@25/12.5 kHz, TIA-603) |
75/55 dB typ.(@25/12.5 kHz, TIA-603B),75/72 dB typ.(@25/12.5 kHz, TIA-603) |
Digital |
63 dB typ.(@C4FM, H-DQPSK, TIA-102) |
60 dB typ.(@C4FM, H-DQPSK, TIA-102) |
|
Spurious response rejection |
80 dB typ. |
76 dB typ. |
|
Intermodulation rejection |
Analog |
75 dB typ. |
74 dB typ. |
Digital |
75 dB typ. |
74 dB typ. |
|
Audio output power |
Internal SP |
1300 mW typ. (at 5% distortion with 8 Ω load) |
|
External SP |
1000 mW typ. (at 5% distortion with 8 Ω load) |
||
Measurements made in accordance with TIA-102 (P25), TIA-603 (FM Wide/narrow).
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Applicable U.S. Military Specifications
Standard |
MIL-810 G |
|
|---|---|---|
Method |
Procedure |
|
Low Pressure |
500.5 |
I, II |
High Temperature |
501.5 |
I, II |
Low Temperature |
502.5 |
I, II |
Temperature Shock |
503.5 |
I-C |
Solar Radiation |
505.5 |
I |
Rain Blowing/Drip |
506.5 |
I, III |
Humidity |
507.5 |
II |
Salt Fog |
509.5 |
– |
Dust Blowing |
510.5 |
I |
Immersion |
512.5 |
I |
Vibration |
514.6 |
I |
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standard |
||
|---|---|---|
Dust & Water |
IP68 (Dust-tight and waterproof protection) |
|
Reviews
There are no reviews yet.