Description
General
IC-F3230DT/DS |
IC-F4230DT/DS |
|||
---|---|---|---|---|
Frequency coverage |
136–174 MHz |
350–400 MHz
|
||
Number of channels |
128 channels/8 zones |
|||
Channel spacing(Varies according to version) |
25*/12.5/6.25 kHz |
|||
Type of emission |
16K0F3E*/11K0F3E/8K50F3E/4K00F1E/F1D |
|||
Current drain(approx.) |
Tx |
1.3A (High) |
||
Rx |
400mA/100mA (Max. audio/Standby) |
|||
Dimensions (W×H×D)(projections not included |
53×120×37 mm; 2.09× 4.72×1.46 in
|
|||
Weight (approx.) |
340g; 12oz
|
Transmitter
IC-F3230DT/DS |
IC-F4230DT/DS |
|
---|---|---|
RF output power(at 7.5V DC) |
5W, 2W, 1W
|
4W, 2W, 1W
|
Spurious emissions |
75dB typ. |
|
Frequency stability |
±1.0ppm |
|
Audio harmonic distortion |
1.0/2.0% typ.
|
|
FSK error |
2% typ. |
|
FM Hum and Noise |
52/46dB typ. (W/N) |
46/40dB typ. (W/N) |
Receiver
IC-F3230DT/DS |
IC-F4230DT/DS |
|
---|---|---|
Sensitivity(Analog 12dB SINAD)(Digital 5% BER) |
0.23μV typ.
|
0.24μV typ.
|
Adjacent channel selectivity |
77/71/58dB typ. (W/N/D) |
74/67/58dB typ. (W/N/D) |
Spurious response rejection |
90dB typ. |
80dB typ. |
Intermodulation rejection |
75/75/70dB typ. (W/N/D) |
76/76/72dB typ. (W/N/D) |
Audio output power(at 5% distortion, 8Ω load) |
1000mW typ. (Internal SP)
|
* |
25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth. |
Note: IC-F3230DT/F4230DT is NOT available in some countries. (Not available in the USA.)
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 GMethod, Proc. |
---|---|
Low Pressure Storage |
500.5 I |
Low Pressure Operation |
500.5 II |
High Temperature Storage |
501.5 I |
High Temperature Operation |
501.5 II |
Low Temperature Storage |
502.5 I |
Low Temperature Operation |
502.5 II |
Temperature Shock |
503.5 I-C |
Solar Radiation |
505.5 I |
Rain Blowing |
506.5 I |
Rain Drip |
506.5 III |
Humidity Induced |
507.5 |
Salt Fog |
509.5 |
Dust Blowing |
510.5 I |
Immersion |
512.5 I |
Vibration |
514.6 I |
Shock Functional |
516.6 I |
Shock Transit Drop |
516.6 IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standards |
|
---|---|
Dust & Water |
IP67 (Dust-tight and waterproof protection) |
Reviews
There are no reviews yet.