ICOM

ICOM IP730D IP740D

ICOM IP730D IP740D

HYBRID IP TRANSCEIVERS

Hybrid Handheld IP Radio for
Local & Nationwide Communications

LTE + VHFIP730D
LTE + UHFIP740D
Description

Description

ICOM IP730D IP740D

HYBRID IP TRANSCEIVERS

Hybrid Handheld IP Radio for
Local & Nationwide Communications

[thb_tabs]

Innovative LTE Radios with Licensed Professional Radio Mode for Increased Capacity and Coverage

The IP730D and IP740D are dual mode “hybrid” radios that provide nationwide coverage over LTE networks and conventional VHF/UHF professional radio mode (IDAS™ digital/analog mode).

Dual Mode

The IP730D series can receive both communications from an LTE radio group and IDAS™ (or analog) group at a time (audio mixed). You can press either the main PTT for LTE or the sub PTT button for IDAS™ or analog channel to answer in accordance with pre-programming. If necessary, you can press the main and sub PTT buttons to address two groups at the same time.

Bridge Function

The Bridge function* relays received IDAS™ digital audio to the LTE radio group, while transferring the LTE radio conversations to the IDAS™ group. This function is useful when communicating outside of the LTE service coverage area with an IDAS™ radio, or temporary cross band connection between two IDAS™ radio groups using different frequencies or channels.
(Not available in Analog mode).
* When using the Bridge function, operating time will be shorter and output power of the IP730D/IP740D is reduced to 1 W.
The Bridge function may be prohibited in some countries. Please check the legal requirements in your country before using this function.

LTE Mode

LTE mode provides secure private push-to-talk communication over an LTE (4G) and 3G network*. The cellular network provides coverage into building basements or high-rise floors where conventional radio systems may not reach.
* Network coverage provided by a custom SIM card. Service availability depends on the country.

IDAS™ Mode

IDAS™ digital mode is a conventional VHF/UHF radio mode using licensed professional radio channels. It also provides Individual, Group and All calls with PTT operation. When operating in remote, mountainous areas, 4G/3G networks may not be available. Conventional VHF/UHF communications provide a stable, local alternative.

Sub PTT Button for Dual Mode Operation

The IP730D series has two PTT buttons; the main PTT button and the sub PTT button. You can use one for LTE communication and the other for an IDAS™/Analog channel. The sub PTT button offers smooth switching between talking on LTE and IDAS™/Analog channels.

Full-Duplex Communication in LTE Mode

The IP730D series provides full-duplex operation in LTE mode. This allows you to talk and receive at the same time, much like a telephone conversation.

1500 mW Powerful Audio

Icom’s custom high-power capacity speaker delivers a loud 1500 mW* audio output with improved acoustic sound clarity for noisy environments.

* Typical at 10% distortion.

Built-in Bluetooth® Technology

Bluetooth® Unit

Built-in Bluetooth® capability provides wireless operation with a Bluetooth accessory. The optional Bluetooth® headset, VS-3 has PTT and programmable buttons.

GPS Data Transmission Capability

The IP730D series has a built-in GPS receiver that can automatically transmit position data at programmed intervals*. (LTE mode only)

* GPS mapping software is required separately.
(Not supplied from Icom Inc.)

IP67 Waterproof and Dust-Tight Specification

The IP730D series is durable enough to endure water pressure under 1- meter depth for 30 minutes, and has dust-tight protection. The radio meets MIL-STD-810 specifications.

Emergency Call Features Specification

By holding down the orange emergency button, you can transmit an emergency call. In addition, the radio has three emergency related functions: Man Down, Lone Worker and Motion/Stationary Detection functions. If one of these functions is activated, the radio automatically transmits emergency signals to alert your controller or dispatcher of any potential trouble.
(Common to LTE and IDAS™ mode)

Digital Voice Recording/Playback

The IP730D series can record incoming calls of up to 4 minutes, or a maximum of 10 messages, and the user can check recorded communications.

RoIP Gateway to Link to Other Systems

VE-PG4
 

With the VE-PG4 RoIP gateway, the IP730D series can interconnect with an IP phone and various radio systems including WLAN radio, satellite PTT, LTE, IDAS™ and analog radios.

Other Features

General Features
• 136 – 174, 350 – 470, 400 – 520 MHz versions
• 128 Channels/8 Zones
• Rotary encoder with channel announcement function*1
• DTMF code transmission with optional DTMF microphone, HM-245T*2
• Vibration alert function
• Surveillance function
• AquaQuake™ function prevents audio degradation from a water-logged speaker

IDAS™ Operating Mode
• NXDN™ conventional
• NXDN™ multi-site conventional over IP network
• IDAS™ digital simulcast

IDAS™ Digital Functions
• Over-the-Air Programming (OTAP) function updates the radio configuration over the LTE
• Over-the-Air Alias (OAA)*1 displays the caller’s name without programming
• Up to 500 ID numbers for IDAS™ mode can be saved in the Call List to show the alias name
• Individual, Group and All calls
• Digital voice scrambler (15-bit encryption)
• Talk back

Analog Functions
• CTCSS and DTCS
• 12.5 kHz channel spacing

*1 These functions will be available with future firmware upgrades.
*2 DTMF microphone, HM-245T will be available later.

GENERAL

Audio output power Internal SP (8 Ω load) 1500 mW typical (10% distortion), 1300 mW typical (5% distortion)
External SP (8 Ω load) 1000 mW typical (10% distortion), 650 mW typical (5% distortion)
HM-222H (8 Ω load) 1500 mW typical (10% distortion), 1300 mW typical (5% distortion)
Operating temperature range –30 °C to +60 °C, –22 °F to +140 °F
Power supply voltage 7.5 V DC nominal
Current drain
(approximate)
Receive Max. audio (INT SP) 520 mA,
Stand-by 300 mA
Transmit Hi (5 W) 1.8 A
Dimensions
(H × W × D; Projections not included)
140.5 × 61.7 × 42.8 mm, 5.5 × 2.4 × 1.7 in (with BP-303)
Weight (approximate) 320 g, 11.3 oz (with BP-303)
Bluetooth® technology Version: 4.2, Output: Class 2, Protocol: HFP, HSP

LTE (4G)/W-CDMA (3G)LTE (4G)/W-CDMA (3G)

Network EUR, EXP LTE (4G): B1, B3, B7, B8, B20
W-CDMA: B1, B8
USA LTE (4G): B2, B4, B12
W-CDMA: B2, B5
AUS, EXP LTE (4G): B1, B3, B5, B7, B8, B28
W-CDMA: B1, B5
Rated output power 0.25 W
Receiver sensitivity (QPSK) –102 dBm typ.
Compatibility IP501H, IP503H, IP501M, IP500APP, VE-PG4

IDAS™ digital/Analogue

IP730D IP740D
GENERAL
Frequency range*
(* Depending on the version)
136 – 174 MHz 350 – 470 MHz,
400 – 520 MHz
Number of conventional channels 128 channels /8 zone
Type of emission*
(* Depending on the version)
USA 11K0F3E (15.0 kHz), 4K00F1E, 4K00F1D (6.25 kHz)
EUR, EXP, AUS 8K50F3E (12.5 kHz), 4K00F1E, 4K00F1D (6.25 kHz)
TRANSMITTER
Output power (Hi, L2, L1) 5 W, 2 W, 1 W
Frequency stability ±1.0 ppm
Spurious emissions 90 dB typ. (TIA-603)
0.25 μW (≤ 1 GHz), 1.00 μW (> 1 GHz) (EN301 166, EN300 086)
FM hum and noise (Without CCITT filter) 60 dB typ. (TIA-603)
FSK error 5% max. 1% typ. (EN301 166)
RECEIVER
Sensitivity Digital
(1% BER)
–6.5 dBμV emf typ. (0.24 μV typ.)
(EN301 166)
–7 dBμV emf typ. (0.22 μV typ.)
(EN301 166)
Analogue
(12 dB SINAD)
0.22 μV typ. (TIA-603) 0.17 μV typ. (TIA-603)
Analogue
(20 dB SINAD)
–2 dBμV emf typ. (0.4 μV typ.)
(EN300 086)
–2 dBμV emf typ. (0.4 μV typ.)
(EN300 086)
Adjacent channel
selectivity
Digital 62 dB typ. (EN301 166) 63 dB typ. (EN301 166)
Analogue 67 dB typ. 67 dB typ.
Intermodulation
rejection
Digital 76.5 dBμV emf typ. (EN301 166) 73 dBμV emf typ. (EN301 166)
Analogue 74 dB typ. (TIA-603)
67 dB typ. (EN300 086)
72 dB typ. (TIA-603)
66 dB typ. (EN300 086)
Hum and noise
(Without CCITT filter)
60 dB typ. (TIA-603) 60 dB typ. (TIA-603)

Measurements made in accordance with 3GPP TS-36, TIA-603, EN300 086 and EN301 166.
All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Standard
MIL-810 G
Method
Proc
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

IP Rating

Ingress Protection Standard
Dust & Water IP67 (Dust-tight and waterproof)

Battery Life

Battery Pack Type Capacity Operating time*
LTE VHF UHF
BP-303 Li-ion, 7.2V 3350 mAh (typ.)
3200 mAh (min.)
Up to 24 hours Up to 13 hours (at 5 W)
Up to 15 hours (at 1 W)

* Bluetooth® OFF, Backlight OFF, Duty cycle TX: RX: Stand-by = 5: 5: 90 ratio.

Supplied Accessories

  • Battery pack, BP-303
  • Belt clip, MB-133

(May differ, or not supplied, depending on version)

[smartslider3 slider=”29″]

Catalogs / Brochures

Brochures Name Size
IP730D/IP740D (A4) 4.42MB

Instruction Manual / Guides

Name Model Name Note
INSTRUCTIONS (Boxed with the transceiver) IP730D/IP740D
INSTRUCTION MANUAL IP730D/IP740D

Promotion video of IP730D/IP740D

[/thb_tabs]
Additional information

Additional information

Brand

ICOM

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ICOM IP730D IP740D”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat net

Vestibulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat netus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac vestibulum amet elit