Description
ICOM IC-F1100D IC-F2100D
VHF AND UHF DIGITAL TRANSCEIVERS
Big on Audio, Small on Size
1500 mW Class Leading Audio
[thb_tabs]
Over-the-Air Alias (OAA) Function Displays the Caller’s Name without Programming
[smartslider3 slider=”29″]
[/thb_tabs]
Icom’s Custom High Power Handling Capacity Speaker for 1500 mW of Powerful Audio
Compact, Waterproof Durable Design (IP67/55/54 and MIL-STD-810-G)
Multiple Operating Modes*
- Analog FM
- NXDN™ /dPMR™ conventional
- NXDN™ Type-D single-site trunking
*Available protocol differs depending on the version.
Over-the-Air Alias (OAA) Function Displays the Caller’s Name without Programming
(IC-F1100DT/DS and IC-F2100DT/DS only)
AquaQuake™ Function Clears Any Water Ingress That May Penetrate the Speaker Grill of the Unit
Motion/Stationary Detection, Man Down and Lone Worker Functions
Operating Time of Up To 18 Hours with the Supplied Battery (BP-280)
IDAS™ Conventional and Type-D Single-Site Trunking
General Features
- 136–174, 350–400, 400–470, 450–512, 450–520 MHz versions
- 128 Channels / 8 Zones (for LCD types)
- 16 Channels (for non-display types)
- Icom’s customized speaker offers a louder 1500 mW audio output
- An engineered casing that amplifies and improves acoustic sound clarity
- Compact (52.2 (W) × 111.8 (H) mm; 2.1 × 4.4 in) and lightweight
- IP67/55/54 waterproof and dust-tight protection
- Tested to 12 categories of MIL-STD-810-G environmental tests
- AquaQuake™ – Expels water ingress from the speaker grill
- DTMF autodial memories
- 16-position rotary selector and ON/OFF volume knob
- Programmable keys – Increase the number of programmable key assignments by using the “Shift key”
- Operating times of up to 18 hours (with the supplied BP-280 battery pack)
- Eight character alphanumeric display (for LCD types)
- Three color LED
Operating Mode*
- NXDN or dPMR Mode 1/Mode 2 conventional
- NXDN or dPMR multi-site conventional over IP network
- NXDN Type-D single-site trunking
- Analog mode
- Analog/digital mixed operation (conventional mode)
(* Available protocol differs depending on the version)
Digital Functions (Voice and Data)
- AMBE+2™ vocoder
- Over-the-Air Alias (OAA) displays the caller’s name without programming (for LCD types)
- Individual, Group and All call
- Late entry for Group call
- Status call and Polling
- Short data messages (for LCD types)
- Call alert (NXDN)
- Radio check (RX only) (NXDN)
- GPS position capabilities (requires HM-171GPW)
- Up to 500 ID numbers for IDAS or MDC 1200 signaling system can be saved in the Call List to show the alias name
Analog Functions
- CTCSS and DTCS tone
- 2-Tone and 5-Tone
- MDC functions*; PTT ID, Emergency (TX/RX), Radio check (RX), Stun (RX), Revive (RX)
- BIIS PTT ID transmission
* Depending on the version
Safety and Security
- Digital voice scrambler (Low level encryption)
- Radio Stun/Revive/Kill (RX only)
- Remote monitor (NXDN)/ambience listening (dPMR)
- Man down, Lone worker and Emergency call key capability
- Motion and Stationary detection function
- Surveillance function temporarily turns OFF the beep and LED indicator
- Power ON password (for LCD types)
Scan Functions
- Priority scan monitors one or two priority channels while scanning non-priority channels
- Voting scan automatically selects the optimal repeater site
- Mode dependent scan automatically changes the scan list, depending on the operating channel
- Power ON scan function
- Talk Back timer
Voice/Audio Functions
- Channel announcement function
- VOX function for hands-free operation
- Siren sound for security alarm
General
IC-F1100DT/S |
IC-F1100D |
IC-F2100DT/S |
IC-F2100D |
||
|---|---|---|---|---|---|
| Frequency coverage* (*Varies according to version) |
136–174 MHz (NXDN/dPMR) | 350–400 MHz (NXDN, EXP) 400–470 MHz (NXDN/dPMR USA/EUR/EXP) 450–512 MHz (NXDN, USA) 450–520 MHz (NXDN, EXP) |
|||
| Number of channels | 128 channels/ 8 zones | 16 channels | 128 channels/ 8 zones | 16 channels | |
| Type of emission* (*Depending onversion) |
11K0F3E, 4K00F1E, 4K00F1D (USA) | ||||
| 16K0F3E, 14K0F3E, 11K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EXP) | |||||
| 16K0F3E, 14K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EUR) | |||||
| Power supply requirement | 7.5V DC nominal | ||||
| Current drain (approx.) |
Tx | 1.3A | 1.6 A (at 5 W) 1.4 A (at 4 W) |
||
| Rx | 520 mA /110 mA (Max. audio (internal SP)/Standby) |
520 mA /110 mA (Max. audio (internal SP)/Standby) |
|||
| Antenna impedance | 50Ω | ||||
| Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F (Radio specification) (USA/EXP) |
||||
| –25°C to +55°C (Radio specification) (EUR) |
|||||
| Dimensions (W × H × D; Projections not included) |
IC-F1100DS/D, IC-F2100DS/D: 52.2 × 111.8 × 29.4 mm; 2.1 × 4.4 × 1.2 in (With BP-280)IC-F1100DT, IC-F2100DT: 52.2 × 111.8 × 34.1 mm; 2.1 × 4.4 × 1.3 in (With BP-280) |
||||
| Weight (approx.) | IC-F1100D, IC-F2100D: 258 g, 9.1 oz (With BP-280 and MB-133) IC-F1100DS, IC-F2100DS: 266 g, 9.4 oz (With BP-280 and MB-133) IC-F1100DT, IC-F2100DT: 277 g, 9.8 oz (With BP-280 and MB-133) |
||||
Transmitter
IC-F1100DT/S |
IC-F1100D |
IC-F2100DT/S |
IC-F2100D |
||
|---|---|---|---|---|---|
| Output power (Hi, L2, L1) |
5 W, 2 W, 1 W | 5 W, 2 W, 1 W (400–470 MHz versions)4 W, 2 W, 1 W (All other versions) |
|||
| Maximum frequency deviation | ± 5.0 kHz (25 kHz), ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz) | ||||
| Spurious emissions | 70 dB minimum (USA/EXP) (350–400 MHz is included) | ||||
| 0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR/EXP) (Except 350-400 MHz) |
|||||
| Frequency stability | ±2.0ppm | ±1.0ppm | |||
| Audio harmonic distortion | 0.8% typ. (25 kHz), 0.9% typical (20 kHz), 1.0% typical (12.5 kHz) (at AF 1 kHz 40% deviation) |
0.7% typ. (25 kHz), 0.9% typical (20 kHz), 1.0% typical (12.5 kHz) (at AF 1 kHz 40% deviation) |
|||
| FM Hum and Noise (without CCITT filter) |
46 dB typ. (25 kHz) (EXP), 44 dB typ. (12.5 kHz) (USA/EXP) |
44 dB typical (12.5 kHz) (USA) | |||
| Residual modulations (with CCITT filter) |
51 dB typical (25 kHz), 49 dB typical (20 kHz), 45 dB typical (12.5 kHz) (EUR/EXP) |
54 dB typical (25 kHz), 52 dB typical (20 kHz), 48 dB typical (12.5 kHz) (EUR/EXP) |
|||
| FSK error | 5% maximum | ||||
| External microphone connector | 3-conductor 2.5 (d) mm (1/10 in)/2.2 kΩ | ||||
Receiver
IC-F1100DT/S |
IC-F1100D |
IC-F2100DT/S |
IC-F2100D |
||
|---|---|---|---|---|---|
| Sensitivity | Analog (at 12dB SINAD) | 0.24 μV typical | 0.24 μV typical | ||
| Analog (at 20dB SINAD) | –5 dBμV typ. emf (25/20 kHz), –2 dBμV typ. emf (12.5 kHz) |
–5 dBμV typ. emf (25/20 kHz), –2 dBμV typ. emf (12.5 kHz) |
|||
| Digital (at 5% BER) | –9 dBμV typical emf (0.18 μV typical) |
–8 dBμV typical emf (0.20 μV typical) |
|||
| Adjacent channel selectivity | 77 dB typ. (25 kHz), 75 dB typ. (20 kHz), 67 dB typ. (12.5 kHz), 59 dB typ. (digital) |
76 dB typ. (25 kHz), 75 dB typ. (20 kHz), 69 dB typ. (12.5 kHz), 58 dB typ. (digital) |
|||
| Spurious response rejection | 80 dB typical | ||||
| Intermodulation rejection | Digital | 71 dB typ. (USA/EXP), 74 dBμV emf typ. (EUR/EXP) |
70 dB typ. (USA/EXP), 74 dBμV emf typ. (400–470 MHz, EUR/EXP), 71 dBμV emf typ. (350–400 MHz, EXP) |
||
| Analog | 76 dB typ. (25 kHz, EXP), 75 dB typ. (12.5 kHz, USA/EXP), 69 dB typ. (EUR/EXP) |
77 dB typ. (25 kHz, EXP), 77 dB typ. (12.5 kHz, USA/EXP), 70 dB typ. (EUR/EXP) |
|||
| Hum and noise | (With CCITT filter) | 48 dB typ. (25 kHz, EXP), 43 dB typ. (12.5 kHz, USA/EXP) |
42 dB typical (12.5 kHz, USA) | ||
| (Without CCITT filter) | 51 dB typ. (25 kHz), 49 dB typ. (20 kHz), 46 dB typ. (12.5 kHz) (EUR/EXP) |
50 dB typ. (25 kHz), 48 dB typ. (20 kHz), 45 dB typ. (12.5 kHz) (EUR) |
|||
| AF output power (at 5% distortion) |
Internal SP | 1500 mW typical (With an 8Ω load) | |||
| External SP | 450 mW typical (With an 8Ω load) |
400 mW typical (With an 8Ω load) |
|||
| External speaker connector | 2-conductor 3.5 (d) mm (1⁄8 in)/8 Ω | ||||
All stated specifi cations are subject to change without notice or obligation.
Measurements made in accordance with TIA-603 (USA/EXP) or EN 300-086 (EUR).
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
| Ingress Protection Standard | |
|---|---|
| Dust & Water | IP67 (Dust-tight and Immersion) IP55/IP54 (Dust and Water jets/Water resistant) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery pack, BP-280
- Belt clip, MB-133
- Antenna
- Desktop charger, BC-213*
- AC adapter*, BC-242 (or BC-123SE/SUK/SV)
* May differ, or not supplied, depending on the version.
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| Professional Radios | 8.19MB |
| Business Radio Solutions(European Edition) | 10.04MB |
| IDAS™ Solutions | 2.43MB |
| IDAS™ Digital Simulcast | 1.71MB |
| IC-F1100D/IC-F2100D Series | 1.31MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Precautions(French) | IC-F1000 seris, IC-F1000D/IC-F1100D series, IC-F2000 series, IC-F2000D/IC-F2100D series | |
| Instructions | IC-F1100D series, IC-F2100D series | |
| DOC (DECLARATION OF CONFORMITY) | IC-F1100D/IC-F1100DS/IC-F1100DT | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-F1100D/IC-F1100DS/IC-F1100DT | |
| DOC (DECLARATION OF CONFORMITY) | IC-F2100D/IC-F2100DS/IC-F2100DT | |
| DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-F2100D/IC-F2100DS/IC-F2100DT |
Reviews
There are no reviews yet.