ICOM IC-F5220D IC-F6220D
Series VHF AND UHF DIGITAL TRANSCEIVERS
IDAS™ Digital Mode Operation
The IC-F5220D series provides NXDN™ CAI-based IDAS digital mode operation. It is compatible with IDAS multi-site conventional and IDAS multi-site and single-site trunking.
4W Front Mounted Speaker
4 watts* front facing speaker delivers clear and loud audio throughout a vehicle’s cabin. In addition, the digital modulation provides distinct clarity even at the fringes of the communication range.
* Typical with internal speaker
When you change the operating channel, the radio announces the channel number. Convenient for making radio adjustments without having to look at the radio.
In the multi-site trunking mode, if the signal condition worsens as the radio user moves, the roaming scan automatically finds a new site to retain the communication link and quality.
Built Military Rugged
The tough aluminum die-cast chassis and polycarbonate front panel have been tested to the MIL-STD-810 environmental tests.
Optional Accessory Cable
An external GPS receiver, PC or other equipment can be connected with the optional OPC-2078 (D-sub 25-pin) or OPC-1939 (D-sub 15-pin). The ACC connector provides an ignition switch, external PTT, serial input/output, horn honk, channel control and public address functions, according to the programming.
* No digital modulation “IN” using accessory cables.
IDAS™ Digital Mode Features
- Up to 500 individual and up to 500 group ID aliases (Each for single-site/multi-site/conventional)
- PTT ID and ANI
- Call alert
- SDM (Short Data Message)
- Radio check (RX)
- Stun/kill/revive (RX)
- RAN (Radio Access Number)
- Remote monitor (RX)
- Digital voice scrambler
- ATB (All Trunks Busy) ring back
- GPS data (PC and software required to show received position data)
* TX: Transmit, RX: Receive
- CTCSS/DTCS encoder/decoder*
- 128 channels with 8 zones
- Microphone hanger action programmable
- Power-on password function
- Talk around function
- Voting scan
- Nuisance delete function
- Forced narrow function*
- Time-out-timer, lock-out penalty
* Analog mode only
|Number of channels||128 channels/8 zones|
|Channel spacing||25*/15/12.5/6.25 kHz|
|Type of emission||16K0F3E*/11K0F3E/8K50F3E/4K00F1E/F1D|
|Tx (High)||10A (50W)||11A (45W)|
(Projections not included)
|150×40×167.5 mm; 5.91×1.57×6.59 in|
|Weight (approx.)||1.1kg; 2.4lb|
|Output power (at 13.6V DC)||50W, 25W, 5W
(Hi, L2, L1)
|45W, 25W, 4.5W
(Hi, L2, L1)
|Spurious emissions||87dB typ.||85dB typ.|
|Audio harmonic distortion||3% typ.
(AF 1kHz 40% deviation)
|FM Hum and Noise||50/45dB typ. (W/N)||46/40dB typ. (W/N)|
|FSK error||2% typ.|
|Sensitivity||0.25μV typ. (Analog 12dB SINAD)
0.18μV typ. (Digital 5% BER)
|Adjacent channel selectivity||80/70/65dB typ. (W/N/D)||75/66/60dB typ. (W/N/D)|
|Spurious response rejection||80dB typ.|
|Intermodulation rejection||75/75/70dB typ. (W/N/D)|
|AF output power
(at 5% distortion, 4Ω load)
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|Low Pressure Storage||500.5 I|
|Low Pressure Operation||500.5 II|
|High Temperature Storage||501.5 I|
|High Temperature Operation||501.5 II|
|Low Temperature Storage||502.5 I|
|Low Temperature Operation||502.5 II|
|Temperature Shock||503.5 I-C|
|Solar Radiation||505.5 I|
|Humidity Induced||507.5 II|
|Shock Functional||516.6 I|
|Shock Transit Drop||516.6 IV|
Also meets equivalent MIL STD 810 -C, -D and -E.
Measurements made in accordance with TIA-603.
All stated specifications are subject to change without notice or obligation.
- Hand microphone (HM-152)
- DC power cable
- Mounting bracket kit
- Microphone hanger
- Key assign stickers