dPMR™ MODE 3 EXTERNAL CONTROLLER
dPMR™ Mode 3 Digital Trunking
Total dPMR™ Mode 3 Trunking Solution
Single Site (4 Channels × 1 Site Model)
Multi-Site (6 Channels × 3 Site Model)
Region Wide Network (Up to 256 Sites Multi-Region Connection)
Centralized Control Channel Trunking
The IC-FC5000E dPMR Mode 3 trunking system uses a centralized control channel system. The control channel is independent of the traffic channels and continuously transmits a control signal. The system allocates a traffic channel for the whole duration of a call and can provide quick response during a series of calls.The dPMR Mode 3 trunking system is suited to controlling a large number of users in systems with congested traffic channels.
Up to 32 Channels in a Site
The IC-FC5000E controls up to 32 channels of connected repeaters over an IP network. (One control channel and up to 31 traffic channels.) The IC-FC5000E can be configured with the CS-FC5000 Controller Management Software via a web browser through an IP network.
Up to 32 Site Multi-site Trunking
When used with the CS-FC5000SCS, System Control Software, up to 32 trunking controllers can be connected over an IP network for linking multiple sites. A radio can communicate with other radios registered to the interlinked trunked sites for multi-site roaming and calling service.
Up to 256 Sites Multi-Region Connection
A region is comprised of up to 32 repeater sites controlled under the CS-FC5000SCS. The CS-FC5000SCS can be interconnected and provides multi-region connnection for region wide network virtually across the country.
Channel License System
A four channel license activation key is supplied with the IC-FC5000E controller for a single site system. When increasing repeater channels or deploying multi-site or multi-region system, additional channel license activation keys are required for each repeater channel.
Call Queuing and Pre-Emptive Emergency
If all traffic channels are busy, the user’s call request is automatically stored in the call queuing until a traffic channel is available. The emergency call can give priority level to a normal call in the call queuing, and the emergency call can force another normal priority call to be cleared down.
CS-FC5000 Controller Management Software
- Configures the system settings including repeater channels, fleet settings and various system options
- Firmware update and remote reboot over an IP network
- Web based software allows connecting of multiple clients (up to 20 accounts)
- Supports localized language for system labels
- Save and load the system setting file for the system backup
- Exports SCF (System Configuration File) for programming terminal radios
- Optional RS-MGR2 System Manager software maintains the traffic and system logs to assist in system administration
- A traffic channel can be configured as a secondary control channel
- Telephone interconnect (Planned)
Rear Panel View
|Operating temperature range||0˚C to +40˚C|
|Power supply voltage||12V DC|
|Current drain (approximate)||600mA|
|Dimensions (W×H×D)||483 × 44 × 219 mm (1U height)|
|LAN||RJ-45 connector × 4 (100BASE-TX)|
|WAN||RJ-45 connector × 1 (100BASE-TX)|
|LED||Power, Error, Status|
|Conformity Standards||ETSI TS 102 658|
|dPMR Mode 3 compatible transceivers (versions) are required.|
|dPMR digital repeaters (versions) are required.|
|Ethernet Board||UC-FR5000SE is required for each repeater.
* UC-FR5000SE is already installed to IC-FR5200H or IC-FR6200H.
|VPN Router||SR-VPN1 is the best match VPN router for the
IC-FC5000E trunking system.
|SYSTEM MANAGER||The RS-MGR2 monitors the hardware status and network connectivity/statistics and collects the communication and traffic logs.|
All stated specifications are subject to change without notice or obligation.