ICOM

ICOM IC-FR5000 IC-FR6000

ICOM IC-FR5000 IC-FR6000

dPMR Version VHF AND UHF DIGITAL REPEATERS

Unique Two-in-One Repeaters

VHF IDAS DIGITALIC-FR5000(50W)
UHF IDAS DIGITALIC-FR6000(50W)
Description

Description

ICOM IC-FR5000 IC-FR6000

dPMR Version VHF AND UHF DIGITAL REPEATERS

[thb_tabs]

Two RF Modules in One Unit

The IC-FR5000/FR6000 series has an internal space for installing an optional RF unit, UR-FR5000 or UR-FR6000. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.

50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*

Employing a high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.

* Ambient temperature: 25°C

50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*

When need higher power, the optional UR-PA5000/UR-PA6000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.

* Ambient temperature: 25°C

19-inch Rack Mount Design, 2U Height Low Profile Design

The IC-FR5000/FR6000 series has a rack mount bracket and handles for installation in an industry standard 19-inch rack.

Multiple CTCSS and DTCS Tone Decode

The IC-FR5000/FR6000 series detects multiple CTCSS and DTCS on a channel (up to 16 tones on a table) and downlinks (transmits) the received signal with a specified tone. This function is useful for sharing a channel with multiple groups.

Base Station Operation

The IC-FR5000/FR6000 series has 5 programmable buttons, 12-digit dot-matrix display and 32 memory channels allowing you to use the repeater as a base station.

Other Features

  • Programmable accessory connector (D-sub 25-pin) for connecting trunking controllers or other external devices
  • 5-Tone and DTMF encoder/decoder
  • CW ID transmitter
  • Normal and priority scan setting
  • Wide frequency coverage
  • Built-in audio compander
  • Built-in inversion type voice scrambler** Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.

General

IC-FR5000

IC-FR6000

Frequency coverage
(Varies according to version)
136-174 MHz 400-470 MHz
Number of channels 32 ch
Channel spacing
(Varies according to version)
6.25/12.5/25 or 7.5/15/30 kHz
Type of emission 16K0F3E,
11K0F3E,
11K0F7E/D/W,
8K50F3E,
4K00F1E/D,
4K00F3E
16K0F3E,
11K0F3E,
11K0F7E/D/W,
4K00F1E/D,
4K00F3E
Power supply requirement 13.6V DC
Current drain
(at 13.6V DC)
Tx High 15A
Rx Stand-by 400mA*1
Max. audio 1900mA
Dimensions
(projections not included; W×H×D)
483×88×260 mm
19.02×3.46×10.24 in
Weight (approx.) 5.6kg; 12.3lb

*1 Repeater operation only.

Transmitter

IC-FR5000

IC-FR6000

RF output power (High) 50W
Spurious emissions 80dB
Frequency stability ±0.5ppm
Audio harmonic distortion 1% typical
40% deviation
FM Hum and Noise 52dB typ. (W)
49dB typ. (N)
50dB typ. (W)
45dB typ. (N)
Digital FSK error 5% max.

Receiver

IC-FR5000

IC-FR6000

Sensitivity FM at 12dB SINAD 0.25µV (typ.)
Digital at 5% BER 0.20μV (typ.)
Adjacent channel selectivity (W/N) 78/56dB typ.
Spurious response rejection 90dB typ.
Intermodulation rejection 78dB typ.
AF output power (at 5% distortion) 4.0W (typ.) with a 4Ω load

Function Comparison and Internal Unit Options

IC-FR5000
IC-FR6000

dPMR™ Mode 1/Mode 2 available
Mode 2 Multi-site Conventional UC-FR5000*2
(#12 required)
Mode 3 Trunking UC-FR5000SE*3
Voice Scrambler (Digital) available
Voice Scrambler
(Analgue)*1
Inversion available
CTCSS/DTCS encoder available
decoder available
5-Tone encoder available
decoder available
DTMF autodial available
DTMF decoder available
BIIS 1200
MDC 1200

*1 Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
*2 IC-FR5000/FR6000 Mode 2 version only.
*3 IC-FC5000E external controller required. The IC-FR5000/FR6000 cannot be used as a base station in dPMR Mode 3.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 F
Method, Proc.
High Temperature Storage 501.4 I
High Temperature Operation 501.4 II
Low Temperature Storage 502.4 I
Low Temperature Operation 502.4 II
Vibration 514.5 I
Shock Functional 516.5 I

All stated specifications are subject to change without notice or obligation.

[smartslider3 slider=”29″]

Catalogs / Brochures

Brochures Name Size
IDAS™ Solutions 2.43MB

Instruction Manual / Guides

Name Model Name Note
Instruction Manual IC-FR5000/IC-FR6000 (dPMR)
dPMR controller UC-FR5000
[/thb_tabs]
Additional information

Additional information

Brand

ICOM

Shipping & Delivery

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat net

Vestibulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat netus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac vestibulum amet elit