Description
General
IC-F3360DT/DS |
IC-F4360DT/DS |
|||
---|---|---|---|---|
Frequency coverage |
136–174MHz |
400–470MHz |
||
Number of channels |
512 channels/128 zones |
|||
Type of emission |
8K50F3E, 8K30F1E/F1D, 4K00F1E/F1D |
|||
Channel spacing |
15/12.5/6.25kHz |
|||
Power supply requirement |
7.5V DC nominal |
|||
Current drain(approx.) |
Tx High (at 5W) |
1.5A |
1.8A |
|
Rx |
Rated output |
550mA |
||
Standby |
140mA |
|||
Antenna impedance |
50Ω |
|||
Operating temperature range |
−30°C to +60°C; −22°F to +140°F(Radio specifications) |
|||
Dimensions (W×H×D)(Projections not included) |
53.5×142.7×39.5 mm; 2.11×5.62×1.56 in(With BP-232WP) |
|||
Weight (approx.) |
400g; 14.1oz(With BP-232WP, MB-94R & FA-SC57U) |
Transmitter
IC-F3360DT/DS |
IC-F4360DT/DS |
|||
---|---|---|---|---|
Output power (at 7.5V DC) |
5W, 1W (Hi, Low) |
|||
Max. frequency deviation |
±2.5kHz (Narrow) |
|||
Frequency stability |
±1.0ppm |
|||
Spurious emissions |
75dB typ. |
|||
FM Hum and noise |
50dB typ. (Narrow) |
45dB typ. (Narrow) |
||
Audio harmonic distortion |
1.5% typ. (AF 1kHz 40% deviation) |
|||
FSK error |
1% typ. (Digital 6.25/12.5kHz) |
|||
Ext. microphone connector |
14-pin multi-connector/2.2kΩ |
Receiver
IC-F3360DT/DS |
IC-F4360DT/DS |
|||
---|---|---|---|---|
Sensitivity |
Analog |
0.24μV typ. (12 dB SINAD) |
||
Digital |
−8.0dBμV emf typ. (0.20 μV typ.) (5% BER) |
|||
Adjacent channel selectivity |
68/67/59dB typ. (Narrow/D 12.5kHz/D 6.25kHz) |
|||
Spurious response rejection |
80dB typ. |
|||
Intermodulation rejection |
75/70/70dB typ. (Narrow/D 12.5kHz/D 6.25kHz) |
|||
Hum and noise |
50dB typ. (Narrow) |
48dB typ. (Narrow) |
||
Audio output power(at 5% distortion) |
800mW typ. (Internal SP, 12Ω load)1000mW typ. (External SP, 8Ω load) |
|||
Ext. speaker connector |
14-pin multi-connector/8Ω |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 GMethod, Proc. |
---|---|
Low Pressure Storage |
500.5 I |
Low Pressure Operation |
500.5 II |
High Temperature Storage |
501.5 I |
High Temperature Operation |
501.5 II |
Low Temperature Storage |
502.5 I |
Low Temperature Operation |
502.5 II |
Temperature Shock |
503.5 I-C |
Solar Radiation |
505.5 I |
Rain Blowing |
506.5 I |
Rain Drip |
506.5 III |
Humidity Induced |
507.5 II |
Salt Fog |
509.5 |
Dust Blowing |
510.5 I |
Immersion |
512.5 I |
Vibration |
514.6 I |
Shock Functional |
516.6 I |
Shock Transit Drop |
516.6 IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standards (IC-F3360D/F4360D, BP-232WP and HM-184) |
|
---|---|
Dust & Water |
IP67 (Dust-tight and waterproof protection) |
Reviews
There are no reviews yet.