Description
General
IC-F1000D |
IC-F2000D |
||
---|---|---|---|
Frequency coverage | 136–174MHz | 360–400MHz (EXP), 400–470MHz, 450–512MHz (USA), 450–520MHz (AUS) |
|
Number of channels | 16 channels | ||
Type of emission (* Depending on version) |
16K0F3E*, 11K0F3E*, 8K50F3E, 4K00F1E/D | 16K0F3E*, 11K0F3E, 4K00F1E/D | |
Channel spacing (* Depending on version) |
30*/15*/6.25kHz 25*/12.5/6.25kHz |
25*/12.5/6.25kHz | |
Power supply requirement | 7.5V DC nominal | ||
Current drain (approx.) | Tx High | 1.3A | 1.4A |
Rx Max. audio /Standby |
400mA (Internal SP) /110mA |
400mA (Internal SP) /110mA |
|
Antenna impedance | 50Ω | ||
Operating temperature range | −30°C to +60°C; −22°F to +140°F (Radio specifications) |
||
Dimensions (W×H×D) (Projections not included) |
52.2×111.8×30.3 mm; 2.06×4.4×1.19 in (With BP-280) |
||
Weight (approx.) | 260g; 9.17oz (With MB-133 and BP-280) |
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Transmitter
IC-F1000D |
IC-F2000D |
||
---|---|---|---|
Output power (at 7.5V DC) | 5W, 2W, 1W (Hi, L2, L1) | 4W, 2W, 1W (Hi, L2, L1) | |
Max. frequency deviation | ±5.0kHz/±2.5kHz (Wide/Narrow) | ||
Frequency stability | ±1.0ppm | ||
Spurious emissions | 70dB min. | ||
FM Hum and noise | 46/40dB typ. (W/N) | 50/44dB typ. (W/N) | |
Audio harmonic distortion | 2.0%/1.1% typ. (W/N) (AF 1kHz 40% deviation) |
1.0%/1.5% typ. (W/N) (AF 1kHz 40% deviation) |
|
FSK error | 5.0% max. | ||
Ext. microphone connector | 3-conductor 2.5 (d) mm (1/10″)/2.2kΩ |
Receiver
IC-F1000D |
IC-F2000D |
||
---|---|---|---|
Sensitivity | at 12dB SINAD | 0.21μV typ. | 0.24μV typ. |
at 5% BER | −8dBμV emf typ. | −8dBμV emf typ. | |
Adjacent channel selectivity | 77/69/59dB typ. (W/N/D) | 75/69/58dB typ. (W/N/D) | |
Spurious response rejection | 80dB typ. | ||
Intermodulation rejection | 75/75/71dB typ. (W/N/D) | 75/75/70dB typ. (W/N/D) | |
Hum and noise | 47/43dB typ. (W/N) | 47/42dB typ. (W/N) | |
Audio output power | Internal SP (With 12Ω load) |
800mW typ. (at 5% distortion) | |
External SP (With 8Ω load) |
400mW typ. (at 5% distortion) | ||
Ext. speaker connector | 2-conductor 3.5 (d) mm (1/8″)/8Ω |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL-810 G Method, Procedure |
---|---|
Low Pressure Storage |
500.5 I
|
Low Pressure Operation |
500.5 II
|
High Temperature Storage |
501.5 I
|
High Temperature Operation |
501.5 II
|
Low Temperature Storage |
502.5 I
|
Low Temperature Operation |
502.5 II
|
Temperature Shock |
503.5 I
|
Solar Radiation |
505.5 I
|
Rain Blowing |
506.5 I
|
Rain Drip |
506.5 III
|
Humidity Induced |
507.5
|
Salt Fog |
509.5
|
Dust Blowing |
510.5 I
|
Immersion |
512.5 I
|
Vibration |
514.6 I
|
Shock Functional |
516.6 I
|
Shock Transit Drop |
516.6 IV
|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standard | |
---|---|
Dust & Water |
IP67 (Dust-tight and waterproof protection)
|
Reviews
There are no reviews yet.