Description
General
IC-A120 |
|||
---|---|---|---|
Frequency range (Tx/Rx) | 118.000–136.992 MHz | ||
Channel spacing | 25kHz/8.33kHz | ||
Type of emission | 6K00A3E, 5K60A3E (FCC/EXP) 6K00A3E (Industry Canada) |
||
Operating temperature range | –30˚C to +60˚C; –22˚F to +140˚F | ||
Frequency stability | ±5ppm (–30˚C to +60˚C) | ||
Antenna connector | SO-239 (50Ω) | ||
Number of memory channels | 200 channels | ||
Power supply requirements | 13.75V/27.5V DC | ||
Current drain (at 13.75V) |
Tx | 5.0A (maximum) | |
Rx | Stand-by | 0.5A | |
Max. audio | 4.0A | ||
Dimensions (W×H×D) (Projections are not included) |
161×45×175 (mm) 6.34×1.77×6.89 (in) (approximately) |
||
Weight (approximately) | 1.5kg; 3.3lb (main unit) |
Transmitter
IC-A120 |
|
---|---|
Output power (at 13.75V) (Carrier Power) |
9.0W typical 10.0W maximum |
Spurious emissions | Less than –60dBc |
Modulation | 70% to 100% |
Microphone impedance | 600Ω |
Receiver
IC-A120 |
||
---|---|---|
Intermediate frequencies | 38.85MHz/450kHz (1st/2nd) | |
Sensitivity (at 6dB S/N) | Less than 1μV | |
Selectivity | 8.33kHz | 2.778/7.37kHz (6dB/60dB) |
25kHz | 8/25kHz (6dB/60dB) | |
Spurious response rejection | More than 74dBμ | |
Audio output power (at 10% distortion, 60% modulation) |
Internal SP (8Ω load) |
1.5W typical |
External SP (8Ω load) |
More than 10W | |
Headphone (500Ω load) |
More than 100mW |
Measurements made in accordance with FCC Part 87 and Industry Canada for USA version. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure | 500.5 | I, II |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Humidity | 507.5 | II |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standard |
|
---|---|
Dust & Water | IP54 (Dust-protection and water resistance) |
Reviews
There are no reviews yet.