ICOM IP501M

ICOM IP503H LITE

IP Transceiver

You Can Talk and Listen at the Same Time
Full-Duplex, Dual SIM IP Radio

Categories: , ,

ICOM IP501M

IP Transceiver

Wide Coverage Over an LTE (4G) and 3G Network, Mobile LTE Radio Interoperable with IP501H/IP503H

Nationwide Coverage over LTE (4G) and 3G Networks*

* Service availability varies by country. Network coverage provided by a custom Icom SIM card.

Interoperable with the Handheld IP501H/IP503H

Full-Duplex Communication Provides Multiple Users Simultaneous Conversations

Priority Interrupt Calling Can Break into an On-going Call for an Important Message

Text Message Function Allows You to Send and Receive Messages of up to 32 Characters

Safety Features with Emergency Call & Lone Worker Functions

An Ethernet Port for Data Communication*

* The optional VE-PG4 is required.

D-SUB 25-pin Connector with the Optional OPC-2407 Cable for Interfacing Other Devices, Various Controls and Data Communication

ACC Connector for Ignition Sensing Function

Noise Canceling Function (TX only) for Clear Audio in Noisy Environments

Built-in Bluetooth® and GPS

Optional COMMANDMIC™ Provides a Handheld-like User Interface

Optional COMMANDMIC™

Interconnection with the IP100H and IDAS™ Systems Using the VE-PG4, RoIP Gateway

With a VE-PG4 RoIP gateway, the LTE radio system can interconnect with an IP phone, IP, IDAS™ digital and analog radios.

Dimensions

Rear Panel View

General

Current drain
(Maximum)
TX Less than 0.6 A (13.8 V DC)
Less than 0.4 A (26.4 V DC)
RX Less than 1.2 A (13.8 V DC)
Less than 0.8 A (26.4 V DC)
Operating temperature range –10°C to +60°C; 14°F to +140°F
Dimensions (W × H × D) (Projections not included) 125 × 29 × 156 mm; 4.9 × 1.1 × 6.1 in (Approximate)
Weight 840 g; 1.9 lb (Main unit, approximate)
Voice codec G. 726
Audio output power More than 4 W (External SP, at 10% distortion into a 4 Ω load)
External microphone impedance 600 Ω

All stated specifications are subject to change without notice or obligation.

Interface

Network 4G bands LTE B2, B4, B12 (USA)
LTE B1, B3, B7, B8, B20 (EXP)
LTE B1, B3, B5, B7, B8, B28 (AUS)
3G bands W-CDMA B2, B5 (USA)
W-CDMA B1, B8 (EXP)
W-CDMA B1, B5 (AUS)
Bluetooth Version 2.1 +EDR
LAN RJ-45 type x 1 (Auto MDI/MDI-X)
10BASE-T/100BASE-TX
External speaker jack 3.5 mm (1/8 in) (d), 4 Ω
External equipment connector D-SUB 25-pin type (The optional OPC-2407 is required)

All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Standard
MIL 810 G
Method
Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

Ingress Protection Standard
Dust and Water IP54 (Dust-protection, water resistance)

Supplied Accessories

  • HM-241, speaker microphone
  • LTE antenna (2 pcs)
  • GPS antenna
  • DC power cable
  • Mounting bracket kit
  • Microphone hanger
FITBIT
Watermelon / Teal Classic Band
By Boril Pratama
FITBIT
Go! Print Band
ByBoril Pratama
FITBIT
Watermelon / Teal Classic Band
By Boril Pratama
FITBIT
Jazz Print Band
By Boril Pratama
FITBIT
Night Sky / Neon Yellow Classic Band
By Boril Pratama
FITBIT
Jazz Print Band
By Boril Pratama
FITBIT
Grape Classic Band
By Boril Pratama
FITBIT
Watermelon / Teal Classic Band
By Boril Pratama
FITBIT
Night Sky / Neon Yellow Classic Band
By Boril Pratama
previous arrow
next arrow
Slider

Catalogs / Brochures

Instruction Manual / Guides

Brand

ICOM

Reviews

There are no reviews yet.

Be the first to review “ICOM IP501M”

Your email address will not be published. Required fields are marked *