Icom IC-G88

Kekuatan audio hingga 1500 mW,  Anti Air, dan Mudah Digunakan untuk Menyesuaikan Berbagai Kebutuhan

Category:

General

IC-G88

Frequency coverage
136MHz–174MHz
Type of emissions
16K0F3E, 11K0F3E (25/12.5 kHz)
Number of channels
128 channels
Antenna impedance
50 Ω (BNC)
Power supply requirement
7.5 V DC
Operating temperature range
–30 ˚C to +60 ˚C (Radio only)
Frequency stability
±2.5 ppm
Current drain (Approximate) Tx High
1.5 A
Rx Max. audio/Stand-by
500 mA (Internal SP) / 77 mA
Dimensions (W×H×D)
(Projections not included)
52.2 × 111.8 × 30.3 mm (with BP-280)
Weight Approximate)
270 g (with BP-280)

Transmitter

IC-G88

Output power (at 7.5 V DC)
5.5/2.0/1.0W
(Hi/L2/L1)
Max. frequency deviation
±5.0kHz/±2.5kHz (Wide/Narrow)
Spurious emissions
70 dB minimum
External microphone connector
3-conductor 2.5(d)mm (1/10″)/2.2kΩ

Receiver

IC-G88

Sensitivity
0.25 µV typical (at 12 dB SINAD)
Squelch sensitivity
0.25 µV typical (at threshold)
Adjacent channel selectivity
76 dB/ 53 dB typical (W/N)
Intermodulation
74 dB typical
Spurious response
70 dB minimum
Audio output power Internal SP
1500 mW typ. (8Ω load)
External SP
400 mW typ. (8Ω load)
External speaker connector
3-conductor 3.5(d)mm (1/8″)/8Ω

Measurements made in accordance with EIA/TIA-603.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard
MIL-810 G
Method
Proc.
Low Pressure
500.5
I, II
High Temperature
501.5
I, II
Low Temperature
502.5
I, II
Temperature Shock
503.5
I-C
Solar Radiation
505.5
I
Rain Blowing/Drip
506.5
I, III
Humidity
507.5
II
Salt Fog
509.5
Dust Blowing
510.5
I
Immersion
512.5
I
Vibration
514.6
I
Shock
516.6
I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Dust & Water
IP67 (Dust-tight and waterproof protection)

Reviews

There are no reviews yet.

Be the first to review “Icom IC-G88”

Your email address will not be published. Required fields are marked *