ICOM IC-FR5200H IC-FR6200H
dPMR Version VHF AND UHF DIGITAL REPEATERS
50W 100% Duty Cycle Operation
Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR5200H series provides 50W output at 100% duty cycle operation. No internal cooling fan required.
dPMR™ Mode 3 Digital Trunking
With the external controller, IC-FC5000E, the IC-FR5200H series can be used in a dPMR Mode 3 digital trunking system. A small number of communication channels are automatically and dynamically allocated to accommodate a large number of subscribers. The trunking sites can be interconnected over an IP network.
dPMR™ Mode 2, Analog FM and Mixed Mode
The IC-FR5200H series is compatible with both analog FM mode and dPMR single site conventional mode (Mode 2). Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and dPMR Mode 2 and to transmit either mode depending on the received signal.
32 Channel Capacity and 5 Programmable Buttons
The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.
Multiple CTCSS, DTCS Tone and CC Decode
The IC-FR5200H series decodes multiple CTCSS and DTCS as well as digital CC on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups.
19-inch Rack Mount, 2U Height Low Profile Design
The IC-FR5200H series uses only 2U height. This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency.
- CW ID transmission
- Digital voice scrambler provides 15-bit key (about 32,000 codes)
- ±0.5ppm high frequency stability
- D-SUB 25-pin accessory connector
- Built-in inversion voice scrambler*
- PTT priority setting (Local Mic., external PTT or repeater operation)
- Built-in audio compander*
- 5-Tone and DTMF encoder/decoder*
- Normal and priority scan
- Low voltage alert
- Key assign stickers supplied
* Analog mode only.
Rear Panel View
|Frequency coverage||136–174 MHz||350–400,
|Number of channels||Max. 32 channels|
|Channel spacing||6.25/12.5/20/25 kHz|
|Type of emission||16K0F3E, 14K0F3E, 8K50F3E,
|Antenna impedance||50Ω (Type-N × 2)|
|Operating temperature range||–30˚C to +60˚C; –22˚F to +140˚F|
|Power supply voltage||13.2 V DC|
(at 13.6V DC)
|RX Max. audio/Stand-by||1.2A/550 mA typ.(LCD backlight OFF)|
|Dimensions (W×H×D)||483×88×360 mm|
|Output power||50 W (adjustable to 5 W)
100% duty cycle (at 20–35˚C, 24 hours)
|Max. frequency deviation||±5.0/±4.0/±2.5 kHz (W/M/N)|
|Spurious emissions||0.25 μW (≤1 GHz), 1.0 μW (>1 GHz)|
|Audio harmonic distortion||1% typ. (40% deviation)|
|Intermodulation attenuation||40 dB min.|
|Digital FSK error||5% Max.|
|Microphone impedance||600 Ω (8-pin modular)|
|Sensitivity||Analog||–10 dBμV max. (12 dB SINAD)|
|Digital||0 dBμV emf. max. (1% BER)|
|Adjacent channel selectivity||(W/M/N)||86/83/75 dB typ.||79/76/71 dB typ.|
|(Digital)||67 dB typ.||63 dB typ.|
|Spurious response||(W/M/N)||80 dB|
|(Digital)||90 dBμV emf|
|Intermodulation rejection||(W/M/N)||75/75/73 dB typ.||72/72/71 dB typ.|
|(Digital)||76 dBμV emf typ.||76 dBμV emf typ.|
|Audio output power||3.5 W min. (5% distortion, 4 Ω load)|
|External speaker connector||2-conductor 3.5 (d) mm (1/8″)/4Ω|
All stated specifications are subject to change without notice or obligation.