General
IC-FR5000 |
IC-FR6000 |
|||
|---|---|---|---|---|
| Frequency coverage (Varies according to version) |
136-174 MHz
|
400-470 MHz
|
||
| Number of channels |
32 ch
|
|||
| Channel spacing (Varies according to version) |
6.25/12.5/25 or 7.5/15/30 kHz
|
|||
| Type of emission |
16K0F3E,
11K0F3E, 11K0F7E/D/W, 8K50F3E, 4K00F1E/D, 4K00F3E |
16K0F3E,
11K0F3E, 11K0F7E/D/W, 4K00F1E/D, 4K00F3E |
||
| Power supply requirement |
13.6V DC
|
|||
| Current drain (at 13.6V DC) |
Tx High |
15A
|
||
| Rx | Stand-by |
400mA*1
|
||
| Max. audio |
1900mA
|
|||
| Dimensions (projections not included; W×H×D) |
483×88×260 mm
19.02×3.46×10.24 in |
|||
| Weight (approx.) |
5.6kg; 12.3lb
|
|||
*1 Repeater operation only.
Transmitter
IC-FR5000 |
IC-FR6000 |
|
|---|---|---|
| RF output power (High) |
50W
|
|
| Spurious emissions |
80dB
|
|
| Frequency stability |
±0.5ppm
|
|
| Audio harmonic distortion |
1% typical
40% deviation |
|
| FM Hum and Noise |
52dB typ. (W)
49dB typ. (N) |
50dB typ. (W)
45dB typ. (N) |
| Digital FSK error | 5% max. | |
Receiver
IC-FR5000 |
IC-FR6000 |
||
|---|---|---|---|
| Sensitivity | FM at 12dB SINAD |
0.25µV (typ.)
|
|
| Digital at 5% BER |
0.20μV (typ.)
|
||
| Adjacent channel selectivity (W/N) |
78/56dB typ.
|
||
| Spurious response rejection |
90dB typ.
|
||
| Intermodulation rejection |
78dB typ.
|
||
| AF output power (at 5% distortion) |
4.0W (typ.) with a 4Ω load
|
||
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
IC-FR5000
|
||
|---|---|---|
| dPMR™ | Mode 1/Mode 2 |
available
|
| Mode 2 Multi-site |
UC-FR5000*2
(#12 required) |
|
| Mode 3 Trunking |
UC-FR5000SE*3
|
|
| Voice Scrambler (Digital) |
available
|
|
| Voice Scrambler (Analgue)*1 |
Inversion |
available
|
| Non-rolling |
UT-109R*4
|
|
| Rolling |
UT-110R*4
|
|
| CTCSS/DTCS | encoder |
available
|
| decoder |
available
|
|
| 5-Tone | encoder |
available
|
| decoder |
available
|
|
| DTMF autodial |
available
|
|
| DTMF decoder |
available
|
|
| BIIS 1200 |
–
|
|
| MDC 1200 |
–
|
|
| *1 | Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler. |
| *2 | IC-FR5000/FR6000 Mode 2 version only. |
| *3 | IC-FC5000E external controller required. The IC-FR5000/FR6000 cannot be used as a base station in dPMR Mode 3. |
| *4 | Either one of these options can be installed. |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
|---|---|
| High Temperature Storage |
501.4 I
|
| High Temperature Operation |
501.4 II
|
| Low Temperature Storage |
502.4 I
|
| Low Temperature Operation |
502.4 II
|
| Vibration |
514.5 I
|
| Shock Functional |
516.5 I
|
Reviews
There are no reviews yet.