ICOM IC-F9511T/S, IC-F9521T/S

Radio seluler tugas berat F9511 / F9521 menyediakan opsi untuk pemasangan dan daya, menawarkan operasi analog digital konvensional dan P25. Versi VHF daya tinggi 110W menyediakan daya yang cukup untuk operasi jarak jauh. Tombol fungsi yang dapat digunakan, dan penutup lampu latar yang dapat disesuaikan. Fitur redup secara otomatis pada lampu latar memungkinkan penglihatan layar yang jelas dan mengurangi kelelahan mata dimalam hari. Icom adalah pilihan cerdas untuk kebutuhan komunikasi keselamatan publik saat ini dan di masa depan.

Category:
General
IC-F9511T/S
IC-F9521T/S
Frequency coverage
(Varies according to version)
136–174MHz
400–470MHz
450–512MHz
Number of channels
Max. 512 channels / 128 zones
Channel spacing
(Varies according to version)
15/30kHz (analog)
12.5kHz (digital)
12.5/25kHz (analog)
12.5kHz (digital)
Type of emission
16K0F3E, 11K0F3E
8K10F1E, 8K10F1D
Current drain
Tx High
11.0A
14.0A
Rx
Stand-by
350mA
Max. audio
1000mA
Dimensions
(projections not included; W×H×D)
175×45×170 mm
6.89 ×1.77 ×6.69 in
Weight (approx.)
1.5kg; 3.3lb
Transmitter
IC-F9511T/S
IC-F9521T/S
RF output power
50W, 25W, 5.0W
Spurious emissions
70dB min.
Frequency stability
±1.0ppm
Audio harmonic distortion
1% typ.
40% deviation
FM Hum and Noise
48dB typ. (W)
45dB typ. (N)
48dB typ. (W)
43dB typ. (N)
Receiver
IC-F9511T/S
IC-F9521T/S
Sensitivity
Analog
0.25μV (typ.) (at 12dB SINAD)
Digital
0.25μV (typ.) (at 5% BER)
Adjacent channel selectivity
Analog (W/N)
81/53dB (typ.)
(TIA/EIA603B)
79*1/53dB (typ.)
(TIA/EIA603)
Digital
63dB (typ.)
Spurious response rejection
85dB min.
70dB*2 min.
Intermodulation rejection
78dB typ.
AF output power
(at 10% distortion with a 4Ω load)
4W (typ.)
22W (typ.)(External audio)
*1 81dB typ. (406.1-420MHz)
*2 85dB min. (406.1-420MHz)
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. 
  Ask your dealer if you need 25kHz bandwidth.
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.
Standard
MIL 810 G
Method
Proc.
Low Pressure
500.5
I, II
High Temperature
501.5
I, II
Low Temperature
502.5
I, II
Temperature Shock
503.5
I-C
Solar Radiation
505.5
I
Humidity
507.5
II
Salt Fog*
509.5
Blowing Dust*
510.5
I
Vibration
514.6
I
Shock
516.6
I, IV
Also meets equivalent MIL-STD-810-C, -D, -E and -F
Ingress Protection Standard
Dust & Water
IP54* (Dust-protection and water resistant)
* Salt fog, Blowing dust and IP54 tests were performed on the controller and RMK-2 only. 

Reviews

There are no reviews yet.

Be the first to review “ICOM IC-F9511T/S, IC-F9521T/S”

Your email address will not be published. Required fields are marked *