VHF/UHF P25 CONVENTIONAL&TRUNKED TRANSCEIVERS
P25 Conventional and Trunking
The IC-F9011 series has P25 conventional and trunking capabilities as standard. You can assign individual channels to analog conventional, P25 conventional or P25 trunking, all within one radio.
The IC-F9011 series conforms to the standard specifications for TIA/EIA TSB-102, CAAB, Digital C4FM Transceiver Performance Recommendations and provides interoperability with other brand P25 equipment for public safety applications.
Digital/Analog Mixed Mode Operation
The mixed mode operation allows you to detect and receive both analog FM and P25 digital modes and to transmit either mode depending on programming.
Individual ID and Talkgroup ID
The IC-F9011T/S and IC-F9021T/S have a 100 individual ID and 250 talkgroup ID memories. Use the display to visually select the person or group you’re going to call.
Optional AES/DES Encryption
The IC-F9011 series provides AES and/or DES encryption for secure conversation with the optional UT-125 AES/DES encryption unit or UT-128 DES encryption unit. Versions certified to FIPS 140-2 Level 1 for AES encryption are available.
Enhanced Vocoder Ready
Using the DVSI’s AMBE+2™ vocoder, the IC-F9011 series is enhanced vocoder ready.
The IC-F9011 series supports P25 OTAR for changing encryption keys over the air.
4-way Navigation Cross Keypad
The 4-way cross keypad* on the front panel provides an intuitive user interface.
* IC-F9011T/S and IC-F9021T/S only.
Encryption Button and 3-Position Zone Select Switch
On the top of the radio, there is a toggle switch to turn the encryption on or off* and the 3 position switch allows you to quickly select an operating zone*.
* According to the programming setting.
Large Dot-Matrix Display*
The IC-F9011T/S and F9021T/S have a large dot-matrix display to show various operating status at a glance. At the bottom line of the display, the key indicator shows the assigned functions to the [I], [II] and [III] buttons for more efficient operation.
At only 41.8mm (121/32 in) thick, the IC-F9011 series is designed as a solid and ergonomic shape that will fit comfortably in your hand.
6W RF Output Power
The IC-F9011T/S/B provides 6W*1 of high output power. The supplied 3040mAh (typ.) Li-Ion battery pack, BP-254, provides 9 hours*2 of operating time.
*1 5W for IC-F9021T/S/B.
*2 Typical operation with Tx: Rx: standby=5:5:90.
1000mW Audio Output Power
The built-in BTL amplifier doubles the audio output power and delivers loud audio to receive all calls under noisy environments. In addition, even when using an optional speaker microphone, the BTL amplifier output is also available from the external accessory connector which increases the audio output via the microphone.
IP67 Dust-Tight and Waterproof Protection
The IC-F9011 series has dust-tight and waterproof protection equivalent to IP67 and is tested to demanding MIL-STD 810 requirements. IP67 waterproof protection means the IC-F9011 series can be submerged in 1 meter of water for 30 minutes. The radio can withstand rugged use even under harsh weather conditions.
14-pin Accessory Connector
The new 14-pin accessory connector enhances the IC-F9011 series performance and capabilities. It has reserved pins for programmable key inputs.
Tactical Group Function
The tactical group function allows you to copy memory channels to the tactical zone and temporarily regroup memory channels. Using the optional zone copy cable, memory channels in the tactical zone can be transferred from a master radio to other radios.
Abundant Scanning Settings
The dual priority scan monitors two primary channels alternately, while scanning other channels. The mode dependent scan function automatically changes the scan list according to the operating channel. The talk back function with timer beep, TX channel and cancel channel settings allow you to preset the transmission channel when you push the PTT button during scanning operation or cancel the scanning.
Optional Man Down Unit
With the optional Man Down unit, UT-124R, the IC-F9011 series automatically sends an emergency signal when the radio is left in a horizontal position for a preset time.
- Wide frequency coverage
- 512 channels/128 zones
- Built-in audio compander*
- Built-in inversion type voice scrambler*
- VOX function for hands-free operation
- Optional waterproof speaker microphone, HM-184
- Talk around function
- CTCSS and DTCS encoder and decoder*
- DTMF autodial*
- 2-Tone encoder and decoder* and MDC 1200 compatible*
* Analog mode only
TM: A Certification Mark of NIST, which does not imply product endorsement by NIST, the U.S. or Canadian Governments.
(Varies according to version)
|Number of memory channels||Max. 512 channels/128 zones|
(Varies according to version)
|Type of emission||16K0F3E, 11K0F3E,
|Rx||Stand-by||300mA (Backlight off)|
|Max. audio||800mA (Backlight off)|
(Projections are not included)
2.31×6.57×1.65 in (with BP-254)
|Weight||533g; 1.17lb (with BP-254)|
|RF output power (High)||6W||5W|
|Spurious emissions||75dB (typ).||80dB (typ).|
|Audio harmonic distortion||2% typical
|FM Hum and Noise||45dB typ. (W)
40dB typ. (N)
|Sensitivity||Analog||0.25μV (typ). (at 12dB SINAD)|
|Digital||0.30μV (typ). (at 5% BER)|
|Adjacent channel selectivity||Analog
|75/48dB (typ). (TIA/EIA603B)
80/70dB (typ). (TIA/EIA603)
|75/50dB (typ). (TIA/EIA603B)
76/70dB (typ.) (TIA/EIA603)
|Spurious response rejection||80dB (typ.)|
|Intermodulation rejection||75dB (typ).|
|AF output power
(at 10% distortion with an 8Ω load)
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.
|Standard||MIL 810 G|
|Low Pressure||500.5||I, II|
|High Temperature||501.5||I, II|
|Low Temperature||502.5||I, II|
|Rain Blowing/Drip||506.5||I, III|
Also meets equivalent MIL-STD-810-C, -D, -E and -F
|Ingress Protection Standard (IC-F9011/F9021 and BP-254)|
|Dust & Water||IP67 (Dust-protection and waterproof protection)|
All stated specifications are subject to change without notice or obligation.
- Battery pack, BP-254
- Antenna, FA-S65V
- Belt clip, MB-115
Note that a Battery charger must be purchased separately.