ICOM IC-F5360D / IC-F6360D

Seri IC-F5360D menyediakan sistem trunking Tipe-C NXDN ™ dan sistem konvensional NXDN ™. Cakupan Area Luas dengan Trunking Tipe-C NXDN ™. Antarmuka pengguna yang digerakkan menu menyediakan pengoperasian yang mudah dan intuitif. IC-F5360D terhubung ke PC atau peralatan eksternal lainnya, fungsi data transparan memungkinkan komunikasi data dalam mode digital. Dapat digunakan untuk kontrol sistem telemetri jarak jauh atau aplikasi data. Seri IC-F5360D memiliki konektor ACC D-Sub 15-pin untuk menghubungkan berbagai perangkat eksternal.

General

		IC-F5360D	IC-F6360D
Frequency coverage		136–174MHz	400–470MHz
Number of channels		512 channels/128 zones
Type of emission		8K50F3E, 8K30F1E/F1D, 4K00F1E/F1D
Channel spacing		15/12.5/6.25 kHz
Power supply requirement		13.6V DC
Current drain (approx.)	Tx (High)	10A (50W)	10A (45W)
Current drain (approx.)	Rx (Max./Standby)	0.9A/250mA
Antenna impedance		50Ω (SO-239)
Operating temperature range		−30°C to +60°C ; −22°F to +140°F
Dimensions (W×H×D) (Projections not included)		160×45×150mm; 6.3×1.77×5.91in
Weight (approx.)		1.3kg; 2.87lb

Transmitter

	IC-F5360D	IC-F6360D
Output power (at 13.6V DC)	50W, 25W, 5W (Hi, L2, L1)	45W, 25W, 4.5W (Hi, L2, L1)
Max. frequency deviation	±2.5kHz (Narrow)
Frequency stability	±1.0ppm
Spurious emissions	87dB typ.	80dB typ.
FM Hum and noise	45dB typ. (Narrow)	45dB typ. (Narrow)
Audio harmonic distortion	1% typ. (AF 1kHz 40% deviation)
FSK error	1% typ. (Digital 6.25/12.5kHz)
Ext. microphone impedance	600Ω (8-pin modular)

Receiver

		IC-F5360D
Sensitivity	Analog	0.25μV typ. (12dB SINAD)
Sensitivity	Digital	−9dBμV emf typ. (0.18 μV typ.) (5% BER)
Adjacent channel selectivity		70/70/59dB typ. (Narrow/D 12.5kHz/D 6.25kHz)
Spurious response rejection		80dB typ.
Intermodulation rejection		75/70/70dB typ. (Narrow/D 12.5kHz/D 6.25kHz)
Hum and noise		40dB typ. (Narrow)
Audio output power		4W typ. (at 5% distortion, 4Ω load)
Ext. speaker connector		2-conductor 3.5 (d) mm (1/8″)/4Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard	MIL-810 G Method, Proc.
Low Pressure Storage	500.5 I
Low Pressure Operation	500.5 II
High Temperature Storage	501.5 I
High Temperature Operation	501.5 II
Low Temperature Storage	502.5 I
Low Temperature Operation	502.5 II
Temperature Shock	503.5 I-C
Solar Radiation	505.5 I
Humidity	507.5 II
Vibration	514.6 I
Shock Functional	516.6 I
Shock Transit Drop	516.6 IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

Reviews

There are no reviews yet.

Be the first to review “ICOM IC-F5360D / IC-F6360D”

ICOM IC-F5360D / IC-F6360D

General

IC-F5360D

IC-F6360D

Frequency coverage

136–174MHz

400–470MHz

Number of channels

512 channels/128 zones

Type of emission

8K50F3E, 8K30F1E/F1D, 4K00F1E/F1D

Channel spacing

15/12.5/6.25 kHz

Power supply requirement

13.6V DC

Current drain

(approx.)

Tx (High)

10A (50W)

10A (45W)

Rx (Max./Standby)

0.9A/250mA

Antenna impedance

50Ω (SO-239)

Operating temperature range

−30°C to +60°C ; −22°F to +140°F

Dimensions (W×H×D)

(Projections not included)

160×45×150mm; 6.3×1.77×5.91in

Weight (approx.)

1.3kg; 2.87lb

Transmitter

IC-F5360D

IC-F6360D

Output power (at 13.6V DC)

50W, 25W, 5W

(Hi, L2, L1)

45W, 25W, 4.5W

(Hi, L2, L1)

Max. frequency deviation

±2.5kHz (Narrow)

Frequency stability

±1.0ppm

Spurious emissions

87dB typ.

80dB typ.

FM Hum and noise

45dB typ. (Narrow)

45dB typ. (Narrow)

Audio harmonic distortion

1% typ. (AF 1kHz 40% deviation)

FSK error

1% typ. (Digital 6.25/12.5kHz)

Ext. microphone impedance

600Ω (8-pin modular)

Receiver

IC-F5360D

IC-F6360D

Sensitivity

Analog

0.25μV typ. (12dB SINAD)

Digital

−9dBμV emf typ. (0.18 μV typ.) (5% BER)

Adjacent channel selectivity

70/70/59dB typ. (Narrow/D 12.5kHz/D 6.25kHz)

Spurious response rejection

80dB typ.

Intermodulation rejection

75/70/70dB typ. (Narrow/D 12.5kHz/D 6.25kHz)

Hum and noise

40dB typ. (Narrow)

Audio output power

4W typ. (at 5% distortion, 4Ω load)

Ext. speaker connector

2-conductor 3.5 (d) mm (1/8″)/4Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard

MIL-810 G

Method, Proc.