ICOM IC-F5061D IC-F6061D

ICOM IC-F5061D / IC-F6061D

Series VHF AND UHF DIGITAL TRANSCEIVERS

LTR™ / Conventional / DIGITAL* Multi-mode Professional Mobile!

VHF/IDAS DIGITALIC-F5061D
UHF/IDAS DIGITALIC-F6061D

ICOM IC-F5061D / IC-F6061D

Series VHF AND UHF DIGITAL TRANSCEIVERS

Built-in Basic LTR™ Mode Operation

Group, selective and phone calls are available in built-in LTR™ mode. MDC signaling is also available with LTR™ mode.

IDAS, 6.25kHz Digital Mode Ready

The IDAS 6.25kHz digital mode is available with the UT-126H digital unit*.

* Already installed.

Built-in Versatile Tone Signaling

Use the built-in CTCSS, DTCS, 2-Tone 5-Tone or MDC 1200 capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. Up to ten 2-Tone, eight 5-Tone codes can be decoded on a single memory channel.

IP54 Dust-Protection and Splash Resistance (Controller only)

When used with the optional separation kit, RMK-3, and separation cable, the front panel of the IC-F5061D series can be detached from the main unit. The control head has dust-protection and splash resistance construction equivalent to IP54.

Voting Scan (Analog mode only)

The Voting scan detects the signal strength level of repeater sites and automatically selects the strongest station, useful for roaming between 2 or more repeater sites. Once you program for voting mode in a memory zone, you can easily start voting mode operation by changing the zone setting.

Optional Active Noise Canceling Microphone

The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.

Watch the HM-211 performance video:

Other Features

  • The mode independent setting automatically selects the scanning list, according to the operating channel
  • Nuisance delete
  • Lone worker function
  • Built-in inversion-type voice scrambler*
  • Large dot matrix display and multi-function LCD
  • 8 DTMF autodialing memories
  • D-Sub accessory connector, ignition sensing line and more…

* Inversion type voice scrambler is not compatible with UT-109/UT-110 voice scrambler.

General

IC-F5061D

IC-F6061D

Frequency coverage
(Varies according to version)
136-174 MHz 400–470 MHz
450–512 MHz
350-400MHz (Non – FCC)
Number of channels 512 ch/128 zones
Channel spacing
(Varies according to version)
12.5/25*, 15/30*
6.25 kHz
12.5/25*
6.25 kHz
Type of emission 16K0F3E*,
11K0F3E,
8K10F1E/D,
4K00F1E/D*1(*1 Digital)
16K0F3E*,
11K0F3E,
11K0F7E/D*2,
8K10F1E/D,
4K00F1E/D*1(*1 Digital
*2 Depending on version)
Current drain Tx High 14A/7A (50/25W) 14A/7A (45/25W)
Rx Stand-by 300 mA
Max. audio 1.2A
Dimensions
(projections not included; W×H×D)
160×45×150 mm;
6.3×1.77×5.91 in
Weight (approx.) 1.3kg; 2.9lb

* 25 kHz and 30 kHz bandwidth are no longer available for FCC Part 90 licensees for USA versions.

Transmitter

IC-F5061D

IC-F6061D

RF output power 50W 45W
Spurious emissions 75dB (typ.)
Frequency stability ±1.0ppm
Audio harmonic distortion 3% typical
40% deviation
FM Hum and Noise 45dB typ. (W)
40dB typ. (N)
Digital FSK error 5% max.

Receiver

IC-F5061D

IC-F6061D

Sensitivity 0.25μV (typ. analog for 12 dB SINAD),
0.20μV (typ. digital at 5% BER)
Adjacent channel selectivity (W/N) 85/75dB (typ.)
Spurious response rejection 90dB (typ.)
Intermodulation rejection 77dB (typ.)
AF output power
(at 5% distortion with an 8Ω load)
4W (typ.)

Function Comparison and Internal Unit Options

IC-F5061D
IC-F6061D

Number of option slots 2*
CTCSS/ DTCS encoder Available
decoder Available
2-Tone encoder Available
decoder Available
5-Tone encoder Available
decoder Available
DTMF autodial Available
DTMF decoder Available**
Voice Scrambler Inversion Available
APCO P25 digital
AES encryption
DES encryption
IDAS digital UT-126H***
MPT 1327
MDC 1200 Available
LTR™ trunking Available
PassPort

* One for UT-126H digital unit and one for another option board.
** Possible as a kind of 5-Tone format.
*** Already installed.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 F
Method, Proc.
Low Pressure Storage 500.4 I
Low Pressure Operation 500.4 II
High Temperature Storage 501.4 I
High Temperature Operation 501.4 II
Low Temperature Storage 502.4 I
Low Temperature Operation 502.4 II
Temperature Shock 503.4 I
Solar Radiation 505.4 I
Rain Blowing 506.4 I*
Rain Drip 506.4 III*
Humidity Induced 507.4
Salt Fog 509.4
Dust Blowing 510.4 I
Vibration 514.5 I
Shock Functional 516.5 I
Shock Transit Drop 516.5 IV

* Rain blowing and drip tests were performed on the controller and RMK-3 only.

Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Microphone*
  • Microphone hanger
  • Mounting bracket kit
  • DC power cable
  • Function name sticker

* HM-148G for IC-F5061D versions 55, 58

HM-148T for IC-F5061D version 65

HM-148G for IC-F6061D versions 61, 66

HM-152 for IC-F6061D versions 65, 68

FITBIT
Watermelon / Teal Classic Band
By Boril Pratama
FITBIT
Go! Print Band
ByBoril Pratama
FITBIT
Watermelon / Teal Classic Band
By Boril Pratama
FITBIT
Jazz Print Band
By Boril Pratama
FITBIT
Night Sky / Neon Yellow Classic Band
By Boril Pratama
FITBIT
Jazz Print Band
By Boril Pratama
FITBIT
Grape Classic Band
By Boril Pratama
FITBIT
Watermelon / Teal Classic Band
By Boril Pratama
FITBIT
Night Sky / Neon Yellow Classic Band
By Boril Pratama
previous arrow
next arrow
Slider

Catalogs / Brochures

Instruction Manual / Guides

Name Model Name Note
Instruction Manual IC-F5060 series, IC-F6060 series
Operating guide IC-F5060/F6060 series (BIIS / MDC / LTR / NXDN operation)
Brand

ICOM

Reviews

There are no reviews yet.

Be the first to review “ICOM IC-F5061D IC-F6061D”

Your email address will not be published. Required fields are marked *