ICOM IC-F3360, F4360 DT/DS

Description

Description

General
IC-F3360DT/DS
IC-F4360DT/DS
Frequency coverage
136–174MHz
400–470MHz
Number of channels
512 channels/128 zones
Type of emission
8K50F3E, 8K30F1E/F1D, 4K00F1E/F1D
Channel spacing
15/12.5/6.25kHz
Power supply requirement
7.5V DC nominal
Current drain
(approx.)
Tx High (at 5W)
1.5A
1.8A
Rx
Rated output
550mA
Standby
140mA
Antenna impedance
50Ω
Operating temperature range
−30°C to +60°C; −22°F to +140°F
(Radio specifications)
Dimensions (W×H×D)
(Projections not included)
53.5×142.7×39.5 mm; 2.11×5.62×1.56 in
(With BP-232WP)
Weight (approx.)
400g; 14.1oz
(With BP-232WP, MB-94R & FA-SC57U)
Transmitter
IC-F3360DT/DS
IC-F4360DT/DS
Output power (at 7.5V DC)
5W, 1W (Hi, Low)
Max. frequency deviation
±2.5kHz (Narrow)
Frequency stability
±1.0ppm
Spurious emissions
75dB typ.
FM Hum and noise
50dB typ. (Narrow)
45dB typ. (Narrow)
Audio harmonic distortion
1.5% typ. (AF 1kHz 40% deviation)
FSK error
1% typ. (Digital 6.25/12.5kHz)
Ext. microphone connector
14-pin multi-connector/2.2kΩ
Receiver
IC-F3360DT/DS
IC-F4360DT/DS
Sensitivity
Analog
0.24μV typ. (12 dB SINAD)
Digital
−8.0dBμV emf typ. (0.20 μV typ.) (5% BER)
Adjacent channel selectivity
68/67/59dB typ. (Narrow/D 12.5kHz/D 6.25kHz)
Spurious response rejection
80dB typ.
Intermodulation rejection
75/70/70dB typ. (Narrow/D 12.5kHz/D 6.25kHz)
Hum and noise
50dB typ. (Narrow)
48dB typ. (Narrow)
Audio output power
(at 5% distortion)
800mW typ. (Internal SP, 12Ω load)
1000mW typ. (External SP, 8Ω load)
Ext. speaker connector
14-pin multi-connector/8Ω
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard
MIL-810 G
Method, Proc.
Low Pressure Storage
500.5 I
Low Pressure Operation
500.5 II
High Temperature Storage
501.5 I
High Temperature Operation
501.5 II
Low Temperature Storage
502.5 I
Low Temperature Operation
502.5 II
Temperature Shock
503.5 I-C
Solar Radiation
505.5 I
Rain Blowing
506.5 I
Rain Drip
506.5 III
Humidity Induced
507.5 II
Salt Fog
509.5
Dust Blowing
510.5 I
Immersion
512.5 I
Vibration
514.6 I
Shock Functional
516.6 I
Shock Transit Drop
516.6 IV
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standards (IC-F3360D/F4360D, BP-232WP and HM-184)
Dust & Water
IP67 (Dust-tight and waterproof protection)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ICOM IC-F3360, F4360 DT/DS”

Your email address will not be published. Required fields are marked *

Categories: ,