ICOM IC-F3230DT/DS, IC-F4230DT/DS

Category:
General
IC-F3230DT/DS
IC-F4230DT/DS
Frequency coverage
136–174 MHz
350–400 MHz
400–470 MHz
450–512 MHz
450–520 MHz
Number of channels
128 channels/8 zones
Channel spacing
(Varies according to version)
25*/12.5/6.25 kHz
Type of emission
16K0F3E*/11K0F3E/8K50F3E/4K00F1E/F1D
Current drain
(approx.)
Tx
1.3A (High)
Rx
400mA/100mA (Max. audio/Standby)
Dimensions (W×H×D)
(projections not included
53×120×37 mm; 2.09× 4.72×1.46 in
(With BP-232WP)
Weight (approx.)
340g; 12oz
(With MB-94R, BP-232WP & antenna)
Transmitter
IC-F3230DT/DS
IC-F4230DT/DS
RF output power
(at 7.5V DC)
5W, 2W, 1W
(Hi, L2, L1)
4W, 2W, 1W
(Hi, L2, L1)
Spurious emissions
75dB typ.
Frequency stability
±1.0ppm
Audio harmonic distortion
1.0/2.0% typ.
(AF 1kHz 40% deviation, W/N)
FSK error
2% typ.
FM Hum and Noise
52/46dB typ. (W/N)
46/40dB typ. (W/N)
Receiver
IC-F3230DT/DS
IC-F4230DT/DS
Sensitivity
    (Analog 12dB SINAD)
    (Digital 5% BER)
0.23μV typ.
0.18μV typ.
0.24μV typ.
0.18μV typ.
Adjacent channel selectivity
77/71/58dB typ. (W/N/D)
74/67/58dB typ. (W/N/D)
Spurious response rejection
90dB typ.
80dB typ.
Intermodulation rejection
75/75/70dB typ. (W/N/D)
76/76/72dB typ. (W/N/D)
Audio output power
(at 5% distortion, 8Ω load)
1000mW typ. (Internal SP)
400mW typ. (External SP)
*
25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth.
Note: IC-F3230DT/F4230DT is NOT available in some countries. (Not available in the USA.)
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard
MIL-810 G
Method, Proc.
Low Pressure Storage
500.5 I
Low Pressure Operation
500.5 II
High Temperature Storage
501.5 I
High Temperature Operation
501.5 II
Low Temperature Storage
502.5 I
Low Temperature Operation
502.5 II
Temperature Shock
503.5 I-C
Solar Radiation
505.5 I
Rain Blowing
506.5 I
Rain Drip
506.5 III
Humidity Induced
507.5
Salt Fog
509.5
Dust Blowing
510.5 I
Immersion
512.5 I
Vibration
514.6 I
Shock Functional
516.6 I
Shock Transit Drop
516.6 IV
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standards
Dust & Water
IP67 (Dust-tight and waterproof protection)

Reviews

There are no reviews yet.

Be the first to review “ICOM IC-F3230DT/DS, IC-F4230DT/DS”

Your email address will not be published. Required fields are marked *