ICOM IC-F3210D/F4210D

Description

Description

GENERAL
IC-F3210D
IC-F4210D
Frequency coverage
136–174MHz
400–470MHz
450–512MHz
450–520MHz
Number of channels
16 channels
Channel spacing
25*/15/12.5/6.25kHz
Type of emission
16K0F3E*/11K0F3E/8K50F3E/4K00F1E/F1D
Current drain (approx.)
Tx High
1.3A
1.3A
Rx
Max./Standby
400mA/90mA
400mA/100mA
Dimensions (W×H×D)
(Projections not included)
58×111.5×36.5mm; 2.28×4.39×1.44in
(With BP-265)
Weight (approx.)
320g; 11.3oz
(With MB-124, BP-265 & antenna)
TRANSMITTER
IC-F3210D
IC-F4210D
Output power (at 7.5V DC)
5W, 2W, 1W
(Hi, L2, L1)
4W, 2W, 1W
(Hi, L2, L1)
Spurious emissions
75/71dB typ. (W/N)
75dB typ.
Frequency stability
±1.0ppm
Audio harmonic distortion
(AF 1kHz 40% deviation, W/N)
0.5/0.8% typ.
FSK error
2% typ.
FM Hum and noise
52/46dB typ. (W/N)
50/44dB typ. (W/N)
RECEIVER
IC-F3210D
IC-F4210D
Sensitivity
    (Analog 12dB SINAD)
    (Digital 5% BER)
0.23μV typ.
0.18μV typ.
0.22μV typ.
0.18μV typ.
Adjacent channel selectivity
77/71/58dB typ. (W/N/D)
74/67/58dB typ. (W/N/D)
Spurious response rejection
91dB typ.
80dB typ.
Intermodulation rejection
75/75/70dB typ. (W/N/D)
Audio output power
(at 5% distortion)
800mW typ. (Internal SP, 12Ω load)
400mW typ. (External SP, 8Ω load)
*
25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth.
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard
MIL-810 G
Method, Proc.
Low Pressure Storage
500.5 I
Low Pressure Operation
500.5 II
High Temperature Storage
501.5 I
High Temperature Operation
501.5 II
Low Temperature Storage
502.5 I
Low Temperature Operation
502.5 II
Temperature Shock
503.5 I-C
Solar Radiation
505.5 I
Rain Blowing
506.5 I
Rain Drip
506.5 III
Humidity Induced
507.5 II
Salt Fog
509.5
Dust Blowing
510.5 I
Vibration
514.6 I
Shock Functional
516.6 I
Shock Transit Drop
516.6 IV
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standards
Dust & Water
IP54 (Dust-protection and water resistant)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ICOM IC-F3210D/F4210D”

Your email address will not be published. Required fields are marked *

Categories: ,