Icom IC-F1000D/2000D

Radio Bisnis Digital yang Tahan Air

Category:

General

IC-F1000D

IC-F2000D

Frequency coverage 136–174MHz 360–400MHz (EXP),
400–470MHz,
450–512MHz (USA),
450–520MHz (AUS)
Number of channels 16 channels
Type of emission
(* Depending on version)
16K0F3E*, 11K0F3E*, 8K50F3E, 4K00F1E/D 16K0F3E*, 11K0F3E, 4K00F1E/D
Channel spacing
(* Depending on version)
30*/15*/6.25kHz
25*/12.5/6.25kHz
25*/12.5/6.25kHz
Power supply requirement 7.5V DC nominal
Current drain (approx.) Tx High 1.3A 1.4A
Rx Max. audio
/Standby
400mA (Internal SP)
/110mA
400mA (Internal SP)
/110mA
Antenna impedance 50Ω
Operating temperature range −30°C to +60°C; −22°F to +140°F
(Radio specifications)
Dimensions (W×H×D)
(Projections not included)
52.2×111.8×30.3 mm; 2.06×4.4×1.19 in
(With BP-280)
Weight (approx.) 260g; 9.17oz
(With MB-133 and BP-280)

* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.

Transmitter

IC-F1000D

IC-F2000D

Output power (at 7.5V DC) 5W, 2W, 1W (Hi, L2, L1) 4W, 2W, 1W (Hi, L2, L1)
Max. frequency deviation ±5.0kHz/±2.5kHz (Wide/Narrow)
Frequency stability ±1.0ppm
Spurious emissions 70dB min.
FM Hum and noise 46/40dB typ. (W/N) 50/44dB typ. (W/N)
Audio harmonic distortion 2.0%/1.1% typ. (W/N)
(AF 1kHz 40% deviation)
1.0%/1.5% typ. (W/N)
(AF 1kHz 40% deviation)
FSK error 5.0% max.
Ext. microphone connector 3-conductor 2.5 (d) mm (1/10″)/2.2kΩ

Receiver

IC-F1000D

IC-F2000D

Sensitivity at 12dB SINAD 0.21μV typ. 0.24μV typ.
at 5% BER −8dBμV emf typ. −8dBμV emf typ.
Adjacent channel selectivity 77/69/59dB typ. (W/N/D) 75/69/58dB typ. (W/N/D)
Spurious response rejection 80dB typ.
Intermodulation rejection 75/75/71dB typ. (W/N/D) 75/75/70dB typ. (W/N/D)
Hum and noise 47/43dB typ. (W/N) 47/42dB typ. (W/N)
Audio output power Internal SP
(With 12Ω load)
800mW typ. (at 5% distortion)
External SP
(With 8Ω load)
400mW typ. (at 5% distortion)
Ext. speaker connector 2-conductor 3.5 (d) mm (1/8″)/8Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 G
Method, Procedure
Low Pressure Storage
500.5 I
Low Pressure Operation
500.5 II
High Temperature Storage
501.5 I
High Temperature Operation
501.5 II
Low Temperature Storage
502.5 I
Low Temperature Operation
502.5 II
Temperature Shock
503.5 I
Solar Radiation
505.5 I
Rain Blowing
506.5 I
Rain Drip
506.5 III
Humidity Induced
507.5
Salt Fog
509.5
Dust Blowing
510.5 I
Immersion
512.5 I
Vibration
514.6 I
Shock Functional
516.6 I
Shock Transit Drop
516.6 IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

Ingress Protection Standard
Dust & Water
IP67 (Dust-tight and waterproof protection)

Reviews

There are no reviews yet.

Be the first to review “Icom IC-F1000D/2000D”

Your email address will not be published. Required fields are marked *